The speedo sending unit on a QV is different from a normal 308? | FerrariChat

The speedo sending unit on a QV is different from a normal 308?

Discussion in 'Technical Q&A' started by 308GTS, Nov 22, 2003.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    2,223
    TN
    #1 308GTS, Nov 22, 2003
    I called around looking for a new one just in case mine has a problem. Are the QVs sending units different? The carb cars have them on top with a white connector and the QVs are facing down? Is this correct? Are the units different or is the one for the QV upside down. The parts shops didn't seem to know which on fit which model.
     
  2. Mike328

    Mike328 F1 Rookie
    Rossa Subscribed

    Oct 19, 2002
    2,655
    Boulder, CO
    Full Name:
    Mike
    #2 Mike328, Nov 22, 2003
    I was just told by Dave at Sodacom's (www.sodacoms.com) that the speedometer generators for the carb cars are different than the ones used later on (later ones were a magnetic pickup apparently?). Dave provided carb part #124146 (which would appear to be a more expensive part than the speedo generators for the later models, like QVs).

    --Mike
     
  3. atlantaman

    atlantaman Formula 3

    Mar 31, 2002
    1,726
    Roswell, Georgia
    Full Name:
    Charles
    #3 atlantaman, Nov 30, 2003
    yes they are different and they have a different OUTPUT signal. A 308v4 output hooked to a 308v2 speedo will show about 1.72x the speed on your readout
     

Share This Page