360 Interior Trim | FerrariChat

360 Interior Trim

Discussion in '360/430' started by PCH, Apr 21, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PCH

    PCH F1 Rookie

    Apr 7, 2004
    3,007
    #1 PCH, Apr 21, 2004
    What's the best product to use to clean the aluminium trim in the 360?
     
  2. Gary(SF)

    Gary(SF) F1 Rookie

    Oct 13, 2003
    3,637
    Los Altos Hills, CA
    Full Name:
    Gary B.
    #2 Gary(SF), Apr 21, 2004
    Hey Drew, don't you know from previous threads that's PLASTIC!!

    Just kidding,

    Gary
     
  3. thomas_b

    thomas_b Formula Junior

    Sep 15, 2003
    765
    #3 thomas_b, Apr 21, 2004

    one cool tip - I think it was willis360 - for the door sills is WD-40 - works like a charm if you use very little and remove all traces immediately afterwards – would not try it on the interior stuff however
     
  4. Scotty

    Scotty F1 Veteran
    Silver Subscribed

    Oct 31, 2003
    9,879
    Oregon
    Full Name:
    Scotty Ferrari
    #4 Scotty, Apr 21, 2004
    I use Griot's Garage interior cleaner and a microfiber towel--works great. I think (on older 360 trim that is rougher) that the towel makes more of a difference that the solvent.
     
  5. Campione

    Campione Rookie

    Apr 19, 2004
    15
    TürkiyE
    Full Name:
    JeMK
    #5 Campione, Apr 21, 2004
    I'm pretty sure this would work on the shoe scuffs etc. Test it first.
     
  6. TCM

    TCM Formula Junior

    Nov 10, 2003
    552
    Tyngsborough, MA
    #6 TCM, Apr 22, 2004
    Use an interior cleaner with a micrfiber as mentioned above to clean the strip. Then you may even wish to wax the aluminum to protect help protect it from anymore scratching and what not. Hope this helps.
     

Share This Page