How to run codes on 348? | FerrariChat

How to run codes on 348?

Discussion in 'Technical Q&A' started by 308GTS, Dec 2, 2003.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    2,223
    TN
    #1 308GTS, Dec 2, 2003
    How do you check the codes on a 348 with Motronic 2.7? Do you need an OBD-II? If so is this something a DIYer can use and understand? I have run codes on other car but they display on a screen on the dash not on a hand held device. Any info would be appreciated. Thanks.
     
  2. Ferrari Fanatic

    Ferrari Fanatic Formula 3

    Apr 2, 2003
    1,317
    SoCal
    #2 Ferrari Fanatic, Dec 2, 2003

    Your car (pre-1996) is OBDI (versus OBDII).

    I bought a scanner from Kragen less than $100.00. I plugs into a receptacle under the dash. Pull the codes while the car is running. The book includes all the generic codes but none of the P1 codes. Those are Manufacturer specific.
     
  3. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    2,223
    TN
    #3 308GTS, Dec 2, 2003
    Thanks. I appreciate it.
     
  4. zan

    zan Formula Junior

    Nov 15, 2002
    537
    Boston
    Full Name:
    Mark M
    #4 zan, Dec 2, 2003
    I don't know about 348s but 355s with 2.7 have push buttons adjacent to the ecus that will cause check engine light to flash stored codes.
     
  5. brm

    brm Karting

    Apr 26, 2002
    183
    Tampa, FL
    Full Name:
    Bruce R. Morehead
    #5 brm, Dec 3, 2003
    The attached file has the proceedure and codes for the Motronic 2.7.
     
  6. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    2,223
    TN
    #6 308GTS, Dec 3, 2003
    Thanks for the chart. Do you use this with the OBD 1?
     
  7. brm

    brm Karting

    Apr 26, 2002
    183
    Tampa, FL
    Full Name:
    Bruce R. Morehead
    #7 brm, Dec 3, 2003
    Those are the codes that flash on the dash. Just remove the access panels behind the seats and follow the instructions, count the blinks and look up on the chart. I expect that the SD-1 will give much more information.
     
  8. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    2,223
    TN
    #8 308GTS, Dec 3, 2003
    Ok, thanks. Will the check engine light blink? Is this what I am looking for?
     

Share This Page