1/18 enzo problem | FerrariChat

1/18 enzo problem

Discussion in 'Collectables, Literature, & Models' started by maranello_maniac, May 23, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. maranello_maniac

    maranello_maniac Rookie

    Joined:
    Apr 25, 2004
    Messages:
    14
    Location:
    central arkansas
    Full Name:
    josh b
    i was just wondering if anyone else has had problems with the doors on their enzo models i have three of them red,yellow, and black and the doors on the yellow and black ones won't stay up without something to prop them up with
     
    maranello_maniac, May 23, 2004
    #1
  2. F40

    F40 F1 Rookie

    Joined:
    Apr 16, 2003
    Messages:
    3,230
    Location:
    AZ
    Same here.
     
    F40, May 23, 2004
    #2
  3. FerrariTifoisi#1

    FerrariTifoisi#1 Formula Junior

    Joined:
    Apr 25, 2004
    Messages:
    318
    Full Name:
    Jay
    I had that problem on my red one cause there was a hair line crack in the door but the yellow one seems to work fine

    Jason
     
    FerrariTifoisi#1, May 23, 2004
    #3
  4. Alex_V

    Alex_V F1 Rookie BANNED

    Joined:
    Apr 8, 2004
    Messages:
    3,611
    Location:
    Boulder, CO
    Full Name:
    Alex
    Mine dont stay up either, I just wedged a scrunched up piece of paper in there to holf them up when I wanted them up.
     
    Alex_V, May 23, 2004
    #4
  5. DodgeViper01

    DodgeViper01 F1 Veteran

    Joined:
    Oct 1, 2003
    Messages:
    6,867
    Common problem with almost ALL of the models. Was not a real issue when being produced. Go figure, it is Mattel.
     
    DodgeViper01, May 23, 2004
    #5
  6. 360 Spyder

    360 Spyder Formula Junior

    Joined:
    Feb 7, 2004
    Messages:
    379
    Location:
    Near the Cows....
    Full Name:
    Rob
    No problem with all 3 of mine.
     
    360 Spyder, May 23, 2004
    #6
  7. alx355gt

    alx355gt F1 Veteran

    Joined:
    Feb 3, 2004
    Messages:
    9,524
    Location:
    Belgium
    Full Name:
    Alexander
    No problem with my (red) Enzo...
     
    alx355gt, May 24, 2004
    #7
  8. greghurst

    greghurst Formula Junior

    Joined:
    Nov 26, 2003
    Messages:
    283
    Location:
    Casa de Hurst
    Full Name:
    Greg Hurst
    My White enzo is fine
     
    greghurst, May 24, 2004
    #8
  9. Prowler

    Prowler Karting

    Joined:
    Jan 10, 2004
    Messages:
    149
    Location:
    Glendale,Arizona
    Full Name:
    Matt
    you'll have to take the body off to tighten the screws that hold the doors in place.there is 2 on the roof(in between the doors) and 1 screw under the rear part of the front fenderjust in front of the hinge.when they assemble these the hinge pivots are fully painted and after opening and closing a few times you wear off the paint and the door becomes loose in it's pivot.
     
    Prowler, May 24, 2004
    #9

Share This Page