308v4 or 328 intake CAD drawing | FerrariChat

308v4 or 328 intake CAD drawing

Discussion in 'Technical Q&A' started by atlantaman, May 26, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. atlantaman

    atlantaman Formula 3

    Mar 31, 2002
    1,726
    Roswell, Georgia
    Full Name:
    Charles
    #1 atlantaman, May 26, 2004
    Anyone have an accurate CAD drawing of the top part of a 308v4 or 328 intake? I need to make some new gaskets from 1/4" rubber and need to get then water-jet cut. I did some aluminum spacers a while back and did some drawings in CAD but I would like to see what others may have done.

    Before i spend the $ to do the rubber pieces I want to be sure they are correct.
     
  2. FormulaRacer

    FormulaRacer Formula Junior

    Nov 18, 2003
    261
    #2 FormulaRacer, May 27, 2004
    Does the shop have a CMM? Just bring them the manifold if you have itoff,CMM it, and you can have one cut within the hour.
     
  3. atlantaman

    atlantaman Formula 3

    Mar 31, 2002
    1,726
    Roswell, Georgia
    Full Name:
    Charles
    #3 atlantaman, May 27, 2004
    No CMM ---- I will probably have to machine an aluminum test piece from my drawing and try that--and make corrections----
    locally I have a company that does waterjet cutting of rubber gaskets and will take an autoCAD download--I just need it to be correct the first time.
     
  4. FormulaRacer

    FormulaRacer Formula Junior

    Nov 18, 2003
    261
    #4 FormulaRacer, May 27, 2004
    Do you have access to any larger printers?

    You can print out straight drawings 1:1 of them, and tets fit them with paper before cutting them.
     

Share This Page