Speedo removal 308 GTSi | FerrariChat

Speedo removal 308 GTSi

Discussion in 'Technical Q&A' started by samtheclip, Jun 2, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. samtheclip

    samtheclip Karting

    May 30, 2004
    176
    Buffalo, NY
    Full Name:
    Sam Pasceri
    #1 samtheclip, Jun 2, 2004
    My odometer works fine but, the speedo is bouncing. It does keep the correct miles though. I would like to remove it and have it repaired. Can anyone tell me how to go about removing it?

    Thanks!

    81 308 GTSi
     
  2. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,380
    The Cold North
    Full Name:
    Tom
    #2 tbakowsky, Jun 2, 2004
    To remove the speedo you must remove the entire gauge cluster. To do this you have to pull out the 4 round lights in each corner of the cluster. Behined them are philps screws, remove them. To make this easier I remove the streeting wheel, by removing the 3mm allen head screws. CAREFULLY remove the cluster as to not marr the leather with the corners of the cluster. Disconnect all the wiring and there you have it!!
     
  3. samtheclip

    samtheclip Karting

    May 30, 2004
    176
    Buffalo, NY
    Full Name:
    Sam Pasceri
    #3 samtheclip, Jun 2, 2004
    Thank you for your reply!
     
  4. Darolls

    Darolls F1 Veteran
    BANNED

    Jul 2, 2003
    7,782
    Full Name:
    Sparky
    #4 Darolls, Jun 2, 2004
    Be careful pulling out the 4 lights, as the plastic tabs that hold them in place can easily break.
     
  5. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    17,938
    USA
    #5 f355spider, Jun 2, 2004
    Uh, you might want to check the archives...but it may just be the electronic sender, not the speedo that is acting up. The sender is screwed into the transaxle in back.
     

Share This Page