Mondial Hoses | FerrariChat

Mondial Hoses

Discussion in 'Technical Q&A' started by Philjay50, Jun 8, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Philjay50

    Philjay50 Formula Junior

    Jan 16, 2003
    595
    Chester, England
    Full Name:
    Philip
    #1 Philjay50, Jun 8, 2004
    Has anybody changed the coolant hoses on a Mondial. The engine bay and front radiator looks easy but the pipes that run underneath seem to disappear into a void and I cannot get at the clips.
    The only thing I can think is that you have to disconnect them all and then shuffle the ally pipes back and forth to get the rubber one's on ?
     
  2. slewman

    slewman Karting

    May 4, 2004
    158
    #2 slewman, Jun 16, 2004
    Remove the coolant pipes at the front and the coolant pipes between the fuel tanks at the rear. Pull the rubber hoses one at a time thru the center chassis tube out towards the front. Coat the new hoses with talcom powder on the outside to prevent binding on install. I have seen these hoses fall apart from the inside and plug radiators.
     

Share This Page