Rear plastic tail light assembly '86 Testarossa | FerrariChat

Rear plastic tail light assembly '86 Testarossa

Discussion in 'Technical Q&A' started by jselevan, Jan 13, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jselevan

    jselevan Formula 3

    Nov 2, 2003
    1,873
    Trying to clean and detail rear end of my Testarossa. Took off the rear grill and removed the tail light assembly. There are four plastic-head screws on each unit that hold the covers to the base. From age, U.V., and heat, one screw cracked while removing. They have a steel screw, with the head encapsulated in a plastic Phillips type drive head.

    Where can I find these?

    Thanks.

    Jim S.
     
  2. jselevan

    jselevan Formula 3

    Nov 2, 2003
    1,873
    Bruce - thank you for the private message and information. I will call tomorrow.

    Jim S.
     
  3. Frari

    Frari Formula 3

    Nov 5, 2003
    1,194
    brisbane australia
    Full Name:
    tony
    jselevan, interesting question if you have an answer I would like some info as I have been looking for the bulb holders, white plastic fork shape that hold in the bulbs for rear tail lights. if you or anyone has an answer for me it would be appreciated. regards Tony
     
  4. gabriel

    gabriel Formula 3

    > They have a steel screw, with the head encapsulated in a plastic Phillips type drive head.

    Where can I find these?

    Greetings:

    I would be very interested in finding them, as well.
     

Share This Page