How do I attach the heater hose to the blower? | FerrariChat

How do I attach the heater hose to the blower?

Discussion in 'Technical Q&A' started by kdross, Nov 8, 2003.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kdross

    kdross Formula Junior
    Silver Subscribed

    Feb 10, 2002
    887
    NJ
    Full Name:
    Ken
    #1 kdross, Nov 8, 2003
    The hose that attaches to the blower on the right side of the car keeps coming off. I have put the hose on at least 5 times over the past year or two, but it does not stay on for long. I looked up into the firewall area and the hoses seem to be installed with a clamp (turn key style like the two used to keep the air filter hose on in the engine compartment.) Is there a secret as to how the hose stays on the blower, or do I need to use a clamp? The left side hose and blower does not have a clamp and has never come off. Thanks for the help.

    Ken
    308QV
     
  2. Darolls

    Darolls F1 Veteran
    BANNED

    Jul 2, 2003
    7,782
    Full Name:
    Sparky
    #2 Darolls, Nov 8, 2003
    Ken-

    In addition to rivets, Ferrari uses adhesives in a number of areas.

    Maybe some 'Sticky Stuff' will solve your problem.
     
  3. Doc

    Doc Formula Junior

    Sep 13, 2001
    886
    Latham, New York
    Full Name:
    Bill Van Dyne
    #3 Doc, Nov 9, 2003
    Ken--I used a long plastic tie wrap on both of mine. Seems to work OK.
     

Share This Page