© 2019 MOTORSPORT NETWORK. All rights reserved.
Sign up to receive latest updates for Ferrari News, Threads, and Classifieds
Glued with contact adhesive and additionally secured with four barbed clips.
That's how the Scuderia boots are affixed so the CS will be the same.
Hopefully the bumper info helped Eric.
The complete set of requirements are documented in my project thread...
It's all down to the steering rack ratio. F430 and 360 have a very high ratio therefore column mounted paddles are a compromise - that's why we...
According to others on this forum the timing chain check at 45k is deprecated.
Please post a photo of the sensor as it is currently installed.
Do you have the heat shield over the pressure sensor?
It's worth noting that every design aspect of every car is about compromise. In the case of weight loss it's generally down to comfort: for...
Like anything there is good and bad, but a lot of the aftermarket stuff is actually made in China by a handful of the same suppliers.
Sounds good, Eric! I would be tempted to leave the paint to settle for two to three months before commencing with a wrap.
The white plug is the same as the one used on the parking sensor speaker, and it's the only one of that type that I remember seeing on the car.
Different diameter and shorter - they won't fit.
The CCM discs and pads need a bit of hard use to work well. Have a few more hard stops from high speed (a single stop from 120mph doesn't really...
The 360 looks unfinished next to a 430. The back end and interior look unpleasant to me, but looks are so subjective.
Not at all! Please do post here; it will be very interesting to see your project and I am more than happy to help.
I'm on holiday at the moment...
They really don't. Iron brakes are borderline dangerous on the F430 platform if you drive as intended. Easily fixed though.
If your 360 is an early car then it will be without the access panels in the Spider hood tray - on later cars there are holes through which the...
No, but I checked the documentation and both current Leonardo and Launch support it.
Yes, I went for an OEM clutch and Hill release bearing.
Yes, that's right. I have Launch Pro which cannot do those things, or at least the current version could not at the time I needed it to - that may...