© 2023 MOTORSPORT NETWORK. All rights reserved.
https://www.ebay.com/itm/175340106982
I was at a concours years ago with a 500-mile ex-Paul Newman F40. The story was two were bought; one was driven and the other was not.
This video could not be more timely for your question. FERRARI 458 BUYERS GUIDE - Is NOW The Time To Buy Your Dream Ferrari? - YouTube
3 & 4 sound like microswitch issues. They could be caused by # 1. I would start by troubleshooting microswitch 64416800 from parts table...
Great service.
Not entirely true. You can make a backup key that will start the 458 as long as you have the right blade (SIP22) that is cut to match your OEM...
Turn auto-park off before starting the job and make sure the parking brake is not engaged before shutting down and getting the car up in the air....
I had them in originally before swapping back to the old ones. There was no change for me. After another recent drive, the sound is going away....
That is very interesting. Perhaps your slide pins were not driven in all the way? The 458 WSM states the sound will change when tapping these in...
Very interesting. Check the front pad design comparisons (top pad is the new one). [ATTACH]
Perhaps. But they did a ****ty job. My front pads had this inner ring of extra wear as discussed here: Brembo Brake Flaw Problem Carbon Ceramic...
I took it out today and completed the 2nd half of the WSM pad bedding procedure (16 stops from 70 to 12 mph). The "clicking" has subsided to a...
I posted this in the 458 section but hopefully will get more technical types' attention here. About a month ago I noticed a rotational clicking...
Nicely detailed, but still has the green wrench displayed...
Update: After replacing my pads all around, the rotational brake clicking sound continued. This is best described as a clicking from the front...
Good deal (from a subscriber) I found that the 458 is perfectly OK to jack using the outside frame rails a few inches behind the front jack...
This is probably why most of my 355 wheel inserts got cracked and needed to be replaced, too. I can say that I never cracked one!
Thanks. I really hate over-torquing based on word-of-mouth. Not that I do not believe you, I just get scared thinking about bolt stretch and...
No alignment issues. Running PS4S now with 2019 date codes I believe. Fronts look new. Rears are at 5 or 6 32nds (I believe new are 8/32?)...
I have a mild rotational thump that occurs only when braking, only below 25-30mph and it goes away when brakes are nice and hot. Occasional...
