© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I really love FerrariChat! Thanks all for taking the time to respond, I will get on the phone and schedule an estimate. It might be after the...
My beloved wife just bought a red Acura TSX (stick!) and the dealer wanted about $1100 to apply the clear film to protect the door jambs and the...
No affiliation, but very pretty. http://seattle.craigslist.org/see/cto/3409187705.html [ATTACH]
Byron at TruLine in Bellvue is excellent. You can trust him completely and he is very accurate. My favorite example: Asking a customer who brought...
Dont know how to follow that last post, but here goes. I just did this same "all hoses" replacement and I would really recommend getting a...
I'd still consider installing the MR 183. As I say, I bought the unit two and half years ago and just installed it. Mine may be very early in...
Fairview has it right, the main advantage is that the advance curves are guaranteed to be in sync, they can both be lousy, but they will be lousy...
I swapped the two modules on the plate, and that brought them into synch. (Well, and here's the duh part, after I figured out the I put the disti...
I ended up taking the strap off the drivers-sdie fuel tank and then drilling out the pop rivets for first the aluminum firewall plate and then the...
The felt came from a large fabric store, they had several kinds, but this was left over from my son's speaker project. If you buy new, think about...
That is a great catch, I will check that too. I made new wires from a Talor universal spiral core set, but I'll check fo cross-fire as well. Gregg
Here are the labels. I just used a cardboard pattern for the cover, which probably the way to go given the variations in the cars. [ATTACH] [ATTACH]
Thanks, it's been like that all day! I tried swapping the pick-ups on the plate, thinking perhaps there was tolerance stack up that lead to the 4...
Oh, duh. I forgot about the radiator.
I can't remember which would be the sacrificing part, but you may introduce corrosion into the system with brass as a dissimilar metal.
Not that I recall. The holes in the pickup may be oversized, I didn't notice. Help me get my head straight: The diameter of the magnet carrier...
I just installed a Pertronix M183 setup in my GT4. This is the one with both pickups in the same distributor. Went quite well, and the car runs...
I was able to buy it at CarQuest by the foot. You're doing the fron heaters, correct?
I may have gotten the last set of Sumitomo HTR 200 in the States. I called Sumitomo and they were kind enough to point me to the last pair they...
I could not find them. Believe it or not, I fabricated some by cutting down binder clips from the stationery store. They come black coated, but I...
