© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Your Position 0 and 2 pictures are correct. Position 1 looks just like Position 2 with amber straight across. I have the fog button but it...
When I turn on the ignition, the "daytime flasher" (aka DRL in Canada) comes on and is always on, UNLESS I turn on my headlights, then it goes...
I also posted an alert here as a warning to Canadian-spec 348 owners about the WR1 relay upgrade. 348 Starter Relay Modification
I'm capturing this here as an alert to anyone with a CANADIAN spec 348. I installed this relay and had issues with my daytime running lights and,...
Thank you @Qavion and @m.stojanovic for helping me with this! Thanks to your combined knowledge, experience, and efforts my 348 is back on the...
So Miro, would it be fair to say that all native Canadian 348s with this Daytime Running Light (DRL) configuration could experience the same...
Agree. The test that Miro proposed is what zeroed in on this relay. I'm looking forward to his input. I really wish these relays appeared on...
Ferrari F355 GTS This post has picture of these relays being added to a F355 for the Canadian market.
Actually, this may be quite relevant. Canada mandated "Daytime Running Lights" in about 1990 so I assume these relays were factory or dealer...
I conducted your test. Shorting the "start" wire from the starter solenoid results in the clicking of this relay (with orange relay removed and...
I do not believe so. The wiring seems "stock" with no obvious additions. No holes drilled in the dash/console for red blinking lights or...
Yes, I can confirm that, with the test device removed, I still had voltage at pin 86 of the orange relay after cranking. I have now tested...
Ah, excellent writeup, as usual! After @Qavion commented that it might not yet be totally solved, I did one more test last night. I was still...
True enough. At least I have brakes that work properly!
I unplugged the Test Device. With or without test device, there was a light glow at pin 86 of the orange relay with the key in accessory...
Yes, following instructions from you and Miro, I checked the voltage to the orange relay. The "control signal" to the orange relay is the...
. I didn't locate the module yet. I will. I bench-tested the WR1 relay and it seems fine.
It FEELS like it operates correctly. Note that I saw a light glow on the test light as soon as I inserted the key and turned it to accessory...
