© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks Paul and Mike, you helped me solve this. The fuses were fine, but neither window would work either (I hadn't even tried them in a while),...
I went ahead and took the rocker switch out, disconnected it, cleaned both sides of the connections and put it back together with no luck. BTW,...
You guys were able to help me solve one electrical problem, now I have another! I have everything working except the rear defrost (which I will...
Thanks to all. Great information and clarification. Much appreciated
Thanks Steve. While I was checking the fuses, I happened to touch the exterior lights relay and it was warm. When I looked closer, the parking...
I just had some electrical work done on my 87 328, but when I got the car back, the steering column mounted light switch no longer turns the...
Should all three round AC vents on the dash of a 328 turn freely? The middle and right vents of my 328 turn very easily, but the left vent won't...
After trying the new strut, it would not work on an 87 328. The shoulders of the strut are not long enough and the lower shoulder hits the...
Any way to take one from under the dash and use in the dash? At least you won't see the missing one under the dash.
Thanks everyone. Rosso 328's response was especially helpful!
Ricambi has the replacement parts. Part No 62380500 for the gas strut (expensive!) and 40161903 for the screws. Where the lower end of the strut...
I just bought the stabilus strut to replace the original strut in my 87 328, but it is impossible to collapse. I'm scared to put the thing on the...
Does anyone have a good photo of where the horn is on a 1987 328? I've read all the posts stating it should be on the passenger side between the...
Will these vents fit a 328 also? They look very similar.
Thanks for the suggestions. I think that's beyond my ability right now, so I'll take her in to see if the dealer can fix it.
There are a lot of threads on 3x8 horns, but none that quite fit my situation, so I hope someone can help. I have to admit up front, I'm a novice...