© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I searched the archives for some info on how to do this and how much it involves. I didn't find anything. My turn intermittently-working turn...
Thanks, Now I remember the rule was due to the pre-event tech inspections. Since the braided lines were not visible, the club required that...
I have gone to the larger tire size 225/245 on a 328 and 308. No problems. I didn't like the Toyo T1S tires on my 328. Very mushy turn in and a...
Mike, I meant to indicate that I wasn't entirely sure of that. At one time the Porsche Club region where I ran track had a rule that they...
An old trick is to just flip the half shaft over and reverse the rotaiton. They are only worn on one side and reversing the rotation puts new...
It's my understanding that Stainless lines need to be replaced every couple of years. You may want to check this out before deciding.
Rob, Where did you get those?
Sean, I now have the rotary installed in my car and the cold air is fantastic. Far better than the stock York. Thanks for your help on this...
A few weeks after buying my exceptionally clean QV, I saw a 2 valve GTB that was as pretty as any used car I have ever seen. I seriously...
Matt, I'm a little unclear about your starting problem. If the starter is actually spinning the motor and it won't start after sitting for a...
Verell, Thank you for confirming what I suspected. I'll clean and lube the gears before popping for a new motor.
If the starter isn't engaging, it sounds like a solenoid to me. I'm not sure if the solenoid is self contained in the starter.
Yes, It has only happened a couple of times, so I'm not quite sure of the sequence. I thik It happened after I signaled a right turn, and the...
83 308 QV. Sometimes the turn signal lever will not go upward to signal a right turn. It will still move down to signal left, but appears locked...
I had a pair installed in my 308 during a major service recently. I think they came from Rutlands and were surprisingly cheap by Ferrari...
Dave, That's a dandy looking 308, but then it should be since it looks just like mine! Is that a Euro bumper, or did you punch the struts and...
Thanks, but I tried that with no success. I'll try to pull the wheel tomorrow, either that or get a can opener. I'm curious to see what is the...
Kris, That's what I needed to know. Thank you so much!
FWIW. I couldn't find an acceptable 328 to replace the one I disposed of, and decided to look for a 308 QV instead. I bought an 83 QV which...
A mechanic told me my passenger side motor was drawing 20 amps and thus had to be replaced. I'm not so sure. Couldn't this voltage spike be...
