© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi Erik, how are you doing? Part number 157900, Eurospares have them in stock for a mere €1416.85 each, exclusing VAT. Enjoy.
Why should they be in the same colour since they are not the same diameter?
Floor duct is to cool down the alternator which will fry without it. The grey ducts are for brake cooling.
I cannot see any engine modifications mentioned in the listing.
I use an Autel AL519. Very satisfied with it so far.
That should not be an issue. The cover on my no name actuator was not indexed correctly but I was able to rotate the cover to the correct position...
Some more modern ECUs are programmed so that flooring the throttle (TPS = 100%) when cranking the engine cuts the fuel injection, but it is not...
Well, it seems that @redwedge is using this, so it seems to work? I think I will use one of these and perhaps put the original valve assembly...
Excellent stuff, many thanks.
Interesting, thank you both. Is there a way to test the potentiometer? If the motor seems to rotate accordingly to temperature adjustments I...
£78? You lucky sod... I will consider my options, thanks again for your input. On a more general note I am curious if the heater valve motor...
Thanks @redwedge The generic valve seems like a more attractive offer. I guess you have installed one on your car and if yes do you have...
Hello, The PO of my '96 F355 thought that the heater valve motor died and modified the assembly so that the valve could be operated manually....
Post pictures of the spark plugs. Cleaning the injectors without testing them on a dedicated flow bench is not enough. Ferrari injectors seem to...
On my 2.7 I replaced the original diaphragm as its membrane was torn with one easily available online for something like 70€ and adjusted the rod...
Tubi headers are a must that should be considered right away when searching for an F355, for the reasons already mentioned. Then a twin chamber...
@Joel Delman How much did the conversion end up costing if that's ok to ask?
FWIW, I came to the 550 after completing my Porsche turbo project where I ended up more than doubling the factory power and torque figures, not...
