© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I think I like the P4/P5 wheels better.
Thanks for the information! Especially the audio clips. I still need to fix the exhaust on mine, it's way too loud at freeway speeds, and I hate...
Welcome to the club Mike! I haven't had any issues with mine at about 6-7psi of boost, so my guess is it will work just fine.
You guys are assuming the mileage readout on the odometer is correct... My speedo reads significantly low, which should mean the odometer reads...
Glock was on dry tires on a wet track. It was inevitable that he slip and lose ground, it was just more dramatic when he slid on the last turn...
Just in case you're curious 108mm is equal to 4.252 inches, and matches a 5 x 4-1/4" US standard wheel. That's what's on my car right now. The...
I've got the same bolt-on set up on my Mondial. The boost pressure is controlled on the top end by a waste gate, which is preset to the maximum...
The article says 125 mph is too fast for humans to respond... Funny, my 82 Mondial can go faster than that!
The last few races, Kimi has improved at the end of the race after switching from the hard tires to the softs. He should have been on the option...
Nope, just the front seats.
Is anyone interested in the leather front seats out of a Mondial? The leather is in excellent condition, since it was replaced just before I...
Correction, I have ONE TRX 390/240 tire in excellent shape, the tire that was in the spare tire boot. It still has some of the flashing from the...
82 Mondial-8, One Fan, but the wiring, fuse and relay were all installed for the second fan. I added a second radiator fan and an oil cooler fan,...
The 240 tires are still on the Mondial TRX rims. I was going to get the tires removed and take the rims down to the scrap yard, but if you want...
I have a couple of TRX 240/55 VR 390's, but not the 220's.
Well, maybe we'll see if her neck is strong enough to handle the G-forces then. I seem to remember a famous oval-driving Nascar driver who had...
I just fixed mine, and it was the solder that attached the tab in the switch to the wire. The only place in the wiring they used solder and...
I really like this concept. It has more of a masculine nature to it, a bit like the Dodge Viper, but with better lines.
Just a comment, but you might want to add a heat shield for the starter motor. I did on mine after ceramic coating the headers.
I wear one of my Ferrari shirts on race day around the house, when the F1 race is on. It reminds me to NOT start any projects and miss the race.
