© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I like it, I'd even wait in line to see it :D
Looked for the thread on crazy things heard about your car but couldnt find it so........... I was filling up at the gas station on Saturday...
Maybe they spilt alot of fuel during the service? Not sure why they were so paranoid about fire. Also somethings sounded wrong about the noise...
I have lived in Summerville for 3 years and have not seen you once gil :) 20 miles? you driving only in your neighborhood? I drove for about an...
About a month ago I was having a hot start problem, did lots of research and found that my accumulator was bad so I ordered that and a fuel...
+1000, I said this before but Karl is a class act and a very honest mechanic and I will not take my 308 to anyone else. Granted.....I bought a...
Got Mine from T Rutlands. [url]http://www.trutlands.com just type in accumulator in the search or just call them. I replaced my fuel filter...
Sounds familiar..............Check the accumulator outlet (The hose coming out the back of the accumulator going to the top of the Left fuel...
Thanks for all the good advice. This is indeed a very messy job to do, I purchased a tool from Autozone but found that it was easier to pack it...
I am in the process of cleaning and repacking my CV joints due to a couple of broken Boots that needed to be replaced. I have completly taken the...
I hear ya! I just put in a nice pneumatic system in and finished installing it last night and the first thing my wife said when she saw...
Very nice!!!!! My garage is set up with the tiles as well and I love it. But I have to say that buying a lift was the best thing I did to my...
Pro Park 7 from Derek Weaver. [ATTACH]
Here is the exact tile I went with from Floor Junkies Made from High-Impact Copolymer Polypropylene 12" by 12" by 3/8" thick 3-Diamond Pattern ....
I installed the base and shoe molding after the install of the tile which gave it a clean look against the walls. [ATTACH] [ATTACH]
Tip #2........Use a speed square, pencil and Tin Snips to cut corners or slivers. Table saw or chop saw works good for full length cuts. [ATTACH]...
Sure......I'll take some more pics and post later today. Get a rubber dead blow mallet it works good for laying the tiles down but the key is to...
+1 After a long drive in my 81 I noticed a water trail that only went from just inside my entry gate to my garage......whew! That was a close...
+1 Excellent tiles from floor junkies!!!! [ATTACH] [ATTACH]
Sweet looking 308 Pat!! I bet its a blast to drive in the hills of Santa Clarita.
