© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yassa, copied below is an email from Miltonian explaining how to make a test wire. I did this and was able to pull the codes and repair the...
Best advice (IMHO) on financing anything. Even if you have the ready cash to make the purchase you should consider financing if you can get a...
Thanks for the tip on the antifreeze dye and the glasses. will try that if the leak is not located. Eli, You have an honest dealer who told...
Thanks Chris. Will get on it this weekend. Hope its a hose and not the rads.
Thanks Mitchell.
With the mild winter and the help of the brotherhood I have had a wonderful 6 months of driving my 348. This past Sunday when I pulled into the...
Thanks Ernie
Thanks Miltonian, I did check that but forgot to post that I did. Actually I did that while resolving the O2 sensor codes that you helped me...
My speedometer does not work so I took the dash pod off and cleaned the printed circuit behind the speedometer. I then disconnected the pulse...
As all of you suggested, I cleaned all connectors, installed new O2 sensors, and reset the MAF's to 383. Car starts right up to a steady idle, no...
Well I put in the new Bosch O2 sensors, cleaned all the contacts, and set the MAF's to 383 and guess what? It started instantly, no faltering,...
Apologies for the delay in response to all that are trying to help. Bosch 13120 O2 sensors just (finally) arrived and installed last night. Will...
Mike, This may sound totally ignorant but do I have to get the MAF's reset once I take care of the CEL's? I have cleaned everything and have new...
Thanks Mario
Thanks Mike, I am doing my own work and actually enjoying learning about the car. You are right, the brotherhood is a great help and I am...
Thanks Kai, Mike, and Dave, No Stabilant. Will finish cleaning and assemble tonight. Wish me luck.
Thanks for the information. Do you think I should not also blow out with compressed air? Should I spray from both sides to more thoroughly clean...
Thanks Mike but it is still very hard to reach. Will do the best I can. Kai, as you probably know many tout the benefits of Stabilant. I have...
Last post for today: My radiator warning light has gone off intermittently, sometimes immediately after startup. At Miltonian's...
Searched for connector cleaning techniques and also did not find very much. Other than spraying contact cleaner and blasting with compressed air...