© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Recently, a friend of mine needed help bleeding the F1 Gearbox on a 2005 F430. The problem was that the car was shifting out of 3rd and going...
I know this is an old thread, but incase anyone is still in need of fairly priced high quality replacement backlight Dash Panel for their 360, 430...
I just got done checking the harness pin by pin,.. they are all good. It took me awhile to trace some of the pins, but they all tested good. And...
Do you know if that table is loaded on an EPROM, or the processor ram. Do you think I may have erased it accidentally if I shorted the board when...
Thanks for the offer!!
Thanks for the great advice. The borrowed logger stopped working after I checked the battery for voltage. I am thinking I accidentally reset...
So before going out to replace the battery, I checked the voltage with a Multi-meter and found it is about 3.8 volts. Makes me thing the battery...
I will try changing the Battery, thanks for the info!! I will post some pics of the inside to help anyone else who may have the similar problem.
Got a friends 360 Challenge with a MM MT940 Gauge Cluster and Micro DAS Data Logger. Problem is, I need the software to program it. I believe it...
Great Info! Thanks for all the great leads guys. I am attaching a few pics to show the progress. [ATTACH] [ATTACH] [ATTACH]
I meant to say $250.
Finally finished the EL Panels needed to repair back-lights on the Cruscotto / Digitek Gauge Cluster. If anyone is interested, send me a PM. I...
If anyone is in need of replacement EL Panels for your 360 Challenge Stradale, 360 Modena, 360 Spider, 575 M, F430 (just to name a few) send me a...
nerofer- Thanks for all the helpful info. I will look into your leads. What I mean by interior and exterior is just that, everything. This car...
I have a friend looking to purchase a complete front clip for a 1987 Ferrari 328 GTB. From the windshield forward. Exterior and Interior....
Issue has been resolved!! Had to replace the cluster. Hopefully we all learn from this. The Processor have been specially coded for the a...
@fmaderi Thanks for the offer, but the reason I am trying to transfer all this software to my ThinkPad is because I am condensing my Tuning and...
The software can be run on any computer that can handle the minimum requirements. *Pentium 133MHz Processor *16MB RAM *1GB Memory on Hard...
As most of us know, there are two buttons on the center console that control features on the Gauge cluster. The Left Button Controls the...
The old computer with all my ECU data is getting pretty old and beat-up. I was fortunate enough to find 4 of the ECU software discs ((1.) Base...
