© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Does anyone know the manufacturer of the 488 GT3 wheels? Thanks
Love it. Thanks Michael!
Anyone have any pics or details of a 360 N-GT exhaust system?
Why do what everyone else is doing? And who says it's a standard engine ;)
I'm building a Ford GT40 replica, and running the Ferrari 360 V8 in it... Really upset some of the purists! The car designed to beat itself....
Am I right in assuming that the F1 and gated 6speed transmissions are the same box, with the selector mechanism being the only difference? So...
I haven't been on here much lately, so here's the latest... The 360 V8 has now found a home in my new GT40 replica. I'm building and Absolute...
Little steps this week, but steps all the same. I'm using the flywheel from a 458 GT3 (mates perfectly with my 5.5" triple plate clutch from...
I'll be running a Ferrari 458 GT3 flywheel and ring gear with my existing 5.5" AP Racing clutch. The 458 flywheel has the exact same mounting bolt...
Old thread, I know. But I assume there are 2 crank position sensors picking up the 60-2 signal from the flywheel, for the 2x ecu's? (One per bank)
Thanks for the info. I'm fitting the F131 v8 into a 500kg F3000 chassis. I need to make a new flywheel with an integral ring gear. I use a 5.5"...
Does anyone know if the 360 flywheel is neutrally balanced, or does it have any counterweight balance to it? I'm going to have a very small,...
Just read through your 355/F40 tread in the other sub-forum, and that looks like a lot of work. I come from the world of GT40 replicas where...
I think you mean this one by TODA? Not sure if it was in Japan or Europe, but would love to see it in a car... [ATTACH]
For sure, ITBs will be installed soon. Mainly due to space restrictions, but as this engine will see only track work (and high RPM), I have will...
Thanks Trev, that'd be great. For sure, this engine is pretty-much as it came out of the donor. There is a lot to come off the engine, and as...
About to start pulling this engine down to prepare it for racing. Should be a fairly easy conversion, as it's a very tidy unit with low kms....
I'm pretty-much sorted with the Engine Management now, having whittled the long list down to a couple of Australian built ECUs from Microtech...
A quick update. I'm in the process of selecting an ECU to run the F131 V8 in the Ralt. Motec was the preferred option, but am also looking at...
Thanks! I should have stated when referring to power output - the car currently weighs in at 525kgs - and that's with a big cast iron V6. I wonder...
