© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Checked out the MAF sensors and they are working properly, but still getting the same OBD II code, what else could it be, ehat should I check...
Quote: Originally Posted by ferrari_456 My car during idel, not moving, falls to around 500 RPM. Usually is at 700-800 RPM. almost dying,...
For the past couple of weeks, I had my car parked until I took it out this morning, it was driving fine, I had my foot on the gas paddle going...
I do understand what you are saying, but I use my car for racing and also my heads have been shaved down abit so my car runs little bit hotter...
Hi, thanks, this is what I am using now, I want to try a colder spark plug, get very hot and humid here during summer months,
Hi, thanks, but this is exactly what I am using right now, Is there a colder spark plug that I can try? Car gets really hot here in the summer,...
what kind of spark plugs should I put into my 456? What is the best spark plugs for my 456 if I use it for racing and where I live in the...
What is the best spark plugs for my 456 if I use it for racing and where I live in the summer is very very hot..... should I use the coldest...
Have a voltage meter , reads 13.3 v, also new battery....
My car during idel, not moving, falls to around 500 RPM. Usually is at 700-800 RPM. almost dying, but when I step on the gas, of cause it goes...
The ASR light is always coming on when the car gets to around 90 degress celius, normal working temperature. by the way is a 456 M GTA. after it...
I am trying to locate my ASR computer, I have a 456 , I don't see it??? would it be located some where else????????????????
where exactly is the ASR computer located?
So u mean have to take the air filter and tubes apart and clean the inside?
While I am driving today the engine check light came on, the code is p0102, what is it? What and where do I need to check for the problem?...
While I am driving today, engine check light came on and got the code p0102, what is it? Also what do I need to check to see the problem....
So should I also replace the belt? No squeal......... previously alternator and volbattery tested no good. Is 13.3 volts normal during start...
Last light to go off, after cranking it idels normaly. It wasn't like that before , all lights would go off together...
I replaced my 456 with a new battery and alternator , when I start up my car, the battery light will come on then go away, everytime is like that....
