© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi I just got through going through a similar problem.I didn't start chasing relays until I was sure the wiring was right. I removed the cover off...
The replacement solenoid from Ferrari part vendors is very expensive. I went to two electronic stores to see if I could find a solenoid that I...
I think my mystery is solved. I finally figured out how to pull the solenoid. When I got it out of the car I found the wires connecting to the...
The problem is a moving target. I just went down stairs to the garage and pushed the engine bonnet switch and it opened. I did it several times...
I have an electrical problem in my QV. Perhaps someone with troubleshooting the electrical circuits can help. The problem is the refueling door...
It's fixed and the wisdom of "Ferrari Chat" prevailed! I printed all the threads regarding the "warm restart" issue. I went through each test....
Once it starts from a cold start it works fine unless I happen to stall it. bruce
I have a 1985 Mondial Cabriolet QV. It starts great if the car is cold but upon warming it will only start if I hold the gas peddle down on the...
I did some more digging in the forum and it helped me understand what the "stop Light" warning light in the monitoring centor console does. It...
I will look into it and check what you have mentioned. However I looked at the wiring diagram and I can't see what actually trips the circuit. IE...
Does anyone have any ideas about why I am getting the "brake warning light" when I step on the brakes and the brake lights come on okay. The book...
SN : 124798 Year : 1985 Model : Mondial QV 3,0 Color : Black Location : San Francisco Bay Area, California e-mail : [email protected]
To all that replied and got me going inthe right direction, Thank You
I am looking for some basic info on how to remove the rear window motors on my cabriolet, its time to bite the bullet and re-grease them....
Viper_driver did you lube cable or does it come prelubes ini the housing? If you had to do it?, got any tips on that thanks again bruce
viper driver, Thanks for the information. The disconnecting seems straight forward, but using a string to pull the new one through is great....
Viper driver Well you got me wondering too. I know electrically they are similar but mechanically I don't know either. I know the part numbers...
Hi, I have a 84 Mondial QV Cabriolet. I took it for a ride today and it ran great except the accelerator had certain points it would stick. I...
Thanks for the help and explanation on how it works. I went into the console and took the black wires off the socket. I taped it up and dropped...
DRG thanks for taking the time to give me valuable info. Today I pulled the antenna switch and compared the wires in the plug to the one that is...
