© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
With the headers and turbo's finalized we had to make some decisions on the exhaust. The standard F40 obviously only has the single wastegate...
It went through some shops that didn't do it any favors, the initial problems were just age related for the most part though.
We were also doing a lot of suspension & brake work so first on the list was a dual brake master cylinder setup with a balance bar. We were...
That's a long list, it wasn't really tuning issues, at first the car was plagued with mechanical and electrical issues that needed to be fixed...
Probably one of the most important things we did was replace all the old oil lines with modern Aeroquip lines. The original ones probably wouldn't...
Yes, 35kPa higher than factory.
The engine was built by another company and basically just strengthened, nothing was done that should effect power (compression, cams, &...
Glad to hear everything went well with the corner balance, did you end up going much lower? You're probably right about the gears I just missed...
Yes, gear oil specific RTV which is exactly how the factory does it...
Definitely a good decision in my opinion. It's really a driver preference I guess, the owner is happy with it and glad he did it so far. I can see...
Meant to upload this one earlier. We also pulled the transmission to install some drop gears and resealed everything (Silicone must be expensive...
465 at the wheels, sorry I meant to put that in the video. I'll post up a graph later.
We just had the opportunity to dyno a beautiful 458 Italia, The sound is just awesome I wish we had a better mic to really capture it....
We definitely want to do this, I would have no problem running it with higher compression even 10:1 especially with some modern cams, cam...
A few more pictures of the headers, you can see we converted them to run dual TiAL gates as close to the collector as possible to improve boost...
I've seen his thread, I wish we had the opportunity to do a full restoration on this one like they were able to do but I don't really see a "leg...
A few more pictures, you can see the new injectors and the blanks machined for the unused ports. These injectors are way more precise than the old...
I'll make sure to post up an intro thread when I get a minute later but the short story is, we're a small shop in Wilmington, NC. We have 5 guys...
A lot of the audio probably isn't very good quality. We should have some better stuff from the track soon but here are the few videos I have right...
We have been involved in the build of this Ferrari F40 for awhile now but have just recently become a sponsor of this site. This car was dropped...
