© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
these are the specs of Novitec springs for the 296GTB: front axle: 70-70-200 rear axle: 10-60-80 and 120-70-200 My car was lowered 25mm front and...
just in case the specs are no "secret" as they are written on the springs... I did not release them here as I am more interested about the general...
Hi, I bought them for my 296GTB. The thinking was lowering the car first for the looks and second, as important, to have stiffer suspensions all...
I only have this one from the side. I was still getting adjustments (but not height) [ATTACH]
Here is mine after some minor "adjustments" [ATTACH]
final result [ATTACH]
with the original gap (especially at the rear) it did not seem it was going to fulfill my goal to just lower it on the original springs. Let alone...
I also have measurements for the springs: OEM: front at 70kg/cm2 (not sure about the units) rear at 80kg/cm2 Novitec: front at 70kg/cm2 rear at...
Here is the final result. The Novitec springs will need to be removed as soon as I get the custom made ones. if anyone in Switzerland is...
okay... I am getting my car back later today. The mechanic told me some of his results. I will see if he is comfortable that I share them here. So...
there are no "Novitec" wheels... they are Vossen's. I will look tomorrow for the offset numbers. The one I mentioned above were given to me by...
this is what I wrote one another thread... 21 inch wheels front and rear 21X9.5 ET38 with 245/30/21 21X12 ET35 with 315/30/21 I would advise...
I understand that. I just wish that they made it right. As is, they are unbalanced compared to OEM ones and that is totally unacceptable (to me)....
i wish I realized that before ordering the spring sets from them...
but so far... 21 inch wheels front and rear 21X9.5 ET38 with 245/30/21 21X12 ET35 with 315/30/21 for the springs (rate and lowering) next week...
I will post when I have all the final details and specs next week. The car still needs to get proper alignment done. Hopefully Monday.
For whoever is interested in Novitec I would recommend extreme caution. Recommended sizes for wheels with tires are not fully tested to say the...
thanks for the suggestion. you may be right about the spacers. but at this point no one seems to care about this situation. i do not feel great...
thanks for the compliment. I look forward to put them back on. and hopefully being able to lower the car a tiny bit (10mm or 15mm) to keep an...
so far I tried to put on Vossen (GNS-1) 21 inch front wheels wrapped with 255/30/21 Michelin PS4 S and it rubs. Same exact specs as the one in the...
