© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hey Guys, I'm in the middle of doing a valve job on my '82 2v.The fences on 2 of my plastic cam gears broke off in my hand.Better now than later....
Thanks guys,appreciate it!
Hey Guys, Sorry if this has been asked before,but on Ferraridatabase they only have shop manuals for the 308gt4 or QV. I have a '82 2v...
Great pic! Hope to meet up with you guys at Tutto this year. Carter
Guys,thank you SO much for your replies and input.I've been reading your threads for years.I really value your...
Guys, I'm about to pull the heads on my '82 2v to change the sodium valves.I've read lots of threads on engine rebuilds and valves but no one...
Thank you,just wanted to make sure I was hitting the right bolts.
Hey Guys, Getting ready to pull the engine on by '82 2v.Trying to unbolt the motor mounts,and the bolts won't budge.Just to make sure I'm doing...
Thanks for the replies! Going to try it now.Chris,I read your thread twice before I started this! Thanks again.
Hi Guys, It's a '82 2v F.I. 308.Read a few threads on pulling the engine out but still have a few questions for the experts. First,what is the...
Take it from me,drive your cars! I let my 308 sit the last 5yrs,untouched,and now it's a mess.The car was almost perfect before I put it away,and...
Thank you so much for all the replies.If people have had luck with SI,I'll give them a call today and compare with Superformance. Really...
Only found a few threads on changing to stainless steel valves.For those that have done it,where did you buy them from?I can only find the...
I've been searching threads for hours,and would appreciate help from the experts.It's an '82 2v.I was experiencing "popping" and "sluggishness". I...
Thanks Joe.Just got the cover off.Had to remove the F.D. from the mount,and slid the cover up and over the studs and over to the pass...
Hey Guys, What's the secret to removing the front cam cover?Do I need to move the fuel distb?It's unbolted and I can slide it to the top of the...
THANKS for all the replies!!!! I really appreciate the help! I ended up using a bolt extractor by Irwin.I rotated the axle so the bolt was up...
Thanks for all the suggestions,I really appreciate it.Haven't had a chance to get back into the garage,been working.Going to try a few of these...
Yep,did the heat....problem is the bit is just not grabbing inside the head,it's stripped.The last person that put them in,didn't have the bit...
Thanks Andy,I'll give it a try....running out of ideas.
