© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
355 Wheels and Tires no scratches or dings wheels have center caps and valve stems. Tires have 80% tread left on them. Fronts are Michelin Pilot...
Yes, Yes engine fired right up after installing jumper wire.Your amazing Steve, Ferrari Chat is lucky to have a person like you. I'll check the...
Ok Steve checked the red wire no voltage, checked the 10 amp fuse in box and it's good. So are we looking at the Stribel Relay # 928.615.124 ?
Connected violet to red, both pumps running with key off. Engine try's to start but just won't catch. Just to clear doubt, there is plenty of gas...
Check both banks and have fire on both. Jumped the violet wire to the red/white on the tachometric relay. Still won't start
Ok jumped both relays and pumps ran on both. I don't hear the clicking sound that I used to hear with the key on before engine start.
Ok will do. FYI tried putting the old 101 relays in and no change.
No ex-lover problem ha ha. I upgraded the relays to Tyco a couple years ago everything worked fine. I thought it might be the fuses they were ok....
Car ran fine last week, today turns over and try's to start but not getting fuel. Both fuel pump 15 amp fuses blown. Help
I have a set off my 89 TR. Original Wheels & Tires. Good Year Pilot HP P255/50ZR16 & P225/50ZR16. Tires are brand new.
This is for the TR Group. I am trying to find a source for the Bosh#0280230006 (F-124717) Relay. I was able to find it on a couple of F Parts...
Steve, I used a paper clip and jumped 30 & 87 you could here the pumps running. I cranked the engine it fired right up and ran perfect. Looks like...
This is a question for Steve First a little history. I have all new Tyco Relays (all but the K relay). I checked that both coils are working. I...
Where is the best place to by the Tyco Relays for my 89TR? I read the posts and looks like I need the Brown and Purple Relays.
Your engine looks real nice, so I know you know how much work it is to get them to look that nice. My belts were fine no cracks or hard spots, the...
Yes I did all the work myself.
I couldn't believe how dirty the engine and engine bay was until I took out the engine and sub-frame. I replated all the fittings that I could but...
Just finished my Engine Out Service. Car has 18000 miles and its been 7 years on the old cam belts. Thought I'd post some pictures for the do it...
Thanks for responding to my question. Here is what I think happened. I take pictures and label everything on these kind of projects. All the wires...
Need to know where the wires go on the coolant temp sensor on the top of the engine on the 89TR. I have the quick disconnects correct but have a...
