© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Understand, thanks. I'm in my garage, rear end on jack stands. I don't have a hoist, so I'm hoping to finagle the gearbox out the bottom like...
Thanks so much for the response - I assume this is Daniel? I totally understand keeping the kit cost down, but for me since I'm going to separate...
Here's my preliminary parts list for the clutch replacement. Any feedback is appreciated; again I have never changed a clutch before myself and...
I’m back from a break and have since done some small jobs, some of which I picked up on from other’s older posts. I pulled out the aftermarket...
If anyone has any feedback on the fluid in my one axle, please let me know, I want to make sure I sort out any issues. Meanwhile, while the rear...
So what’s this about? I unbolted the axles from the gearbox – the left side everything was dry, but the right side had some dirty lubricant on...
A quick side maintenance job, changing the “Active Carbon Filter”. Even with everything I’ve got out of the way, it needed a little persuasion....
Got the new one in. I used 74/64 against the bushing. No heat/freezer, just grease and a few good tries to get started, then the Ryobi impact...
Got it. First I tried different sizes against the bushing with my bent M14 threaded rod. As you can see, I broke the rod. I used my Ryobi...
Thanks. I used 85/75 against the gearbox (I used a bigger size at first until I realized the 85/75 fits right in the groove) and 72/62 to press...
Hey Dominick, I thought so too at first look. But I have no record of it ever being changed (and I have all records since I bought it at ~6500...
I’ve got the Starter out and cleaning that up. Not much serviceable there, it’s just more for me to learn about the car and it has to come off if...
Well, I did pull the oil tank (separator). The paint is bubbled and about to flake so that's going to be fixed. [ATTACH] [ATTACH] [ATTACH]
I’m going to pick-up my exhaust flanges this weekend from Yonkers (next story), and I got my alternator back from a professional refresh (he put...
Well actually, according to the manual, the upper ball does pop off. I just looked again, but it needs more force than I am comfortable with....
Dominick, not sure which side panels you're referring to but yes, dust/dirt everywhere. Not a horrible amount, but just a bit stubborn. I'm...
Just doing a little cleaning today. [ATTACH]
Scott, your friend asks a good question, hopefully someone knows/shares. As we can see, the actuator opens a significant airway between the...
No tricks to getting that panel off, just four 8mm bolts (easy for me to say with everything out of the way!). I understand the F430 has a hole...
The heat shield is part number 69619500. Item 53 in the diagram. My Scuderia (shield standard with the "racing exhaust"). [ATTACH] [ATTACH]
