© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have the same problem on my 328 88 I fixed the solder on the stalk but I still had the problem . I traced it to inside the the column I have not...
Thanks for the website I will contact him.
Sorry about that I did attempt to edit . it was the smaller oring "autocorrect" I will be looking ferrari400 up for those bushings I had seen on...
If I pull the injector out before I remove clip and bushing will the small o ring come out with it or will it fall inside and do you know the...
If I pull the injector out before I remove clip and bushing will the small print come out with it or will it fall inside and do you know the part...
Is there any method to help the bushings along when removing them can you use wd40 or something else while pulling them out to help save them if...
I am going to be cleaning my injectors and I have seen some posts here and they are for earlier setups does anyone know how to remove the...
I am still a little confused . Does the injector twist when you are pulling it out since when you turn on the bolt to lift the injector out ,the...
Do you know what the size and the numbers on the bearings are I am getting ready to do it myself .
The place that did the work had done the 15 and then the 30 when I got it ,so they would have seen the little red paint marks that someone had...
Thanks for the responses I am trying to learn as much as I can I have been successful at many repairs so far. I was taking my car to a Ferrari...
Sorry must of hit the back button:-)
I am looking for someone in northern California that knows about issues with the fuel system on 88 328 I am having a problem that has me a little...
Loosen the three bolts it will go on easy
I did check the rotors when I did the new wires. I will go back and check them
I checked the fuel mix by testing o2 sensor and got it within range and the car seemed to be fine drove it for about 20 miles and then started...
Its US and yes after installing rebuilt wur the cold and warm are good . took the car down the road to my brothers and once it was warmed up it...
Pulled the knob off soldered the black wire and all is well:-)
I rebuilt the wur and now after the car warms it doesn't want to stay at idol it wants to stall out if I keep a little gas on it it will stay...
