© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Would like to change side mirrors on 360 for aftermarket Challenge type mirrors. Any suggestions on who has a good quality mirror very close to...
Are they still available?
Cracked bleeder block part # 235706.....possibly.
Blue Job. Excellent product made for that purpose. You'll need some elbow grease but results are amazing.
How about check engine lights? How did they get around that issue with the aftermarket headers? I've read that many have experienced problems the...
Glad to hear you were able to do the job as I did through the firewall. I know it's a PITA to remove the clamps and oil hose fittings, but I' d...
Probably the fluid block. Same occurred when I bled my brothers 360. Block had hairline crack. They are total crap. A total garbage design. Had to...
At the torque rating they are at I feel it's safer and less damaging to do it by hand. I do it all the time it's no big deal and not that much longer.
Ok so noise problem near alternator fixed and it was the tensioner pulley. Straight forward fix+ replaced belt and tensioned to 100Hz as per WSM....
Thanks Brian, will do. I have a new tensioner and belt on hand. Pretty sure it's the problem but was curious in the possibility of it being a...
Anyone ever have to replace bearings in their alternator on their 360 and if so can't you share the procedure? I'm hearing some noise coming from...
Anyone have the yellow caliper paint codes for the original factory yellow calipers used on a 360? Just would like to keep it as original as...
Just wanted to thank Fab and all that had anything to do with today's incredible turnout! Fab please post or give me a copy of the video that was...
Good observation. Milky could mean that the heat exchanger is going bad and leaking coolant into the gearbox. That needs to be addressed right...
With the undertray removed, there is room between the bumper frame and the gearbox housing, allowing room to pry the filter. See picture attached...
The grommet used was the following;GRD21625375PA from alliance-express. It's a 42mm but I used a 41mm, or 1 5/8" holesaw and filed the opening to...
Not sure, but man what a stupid law. Wonder how these morons get elected?
I agree Terry but according to this article, paulie_b wont be able to use this in the state of Florida. For track...
Make sure it's DOT4 fluid. PBR BF-600 is OK for street driving and much cheaper than the Motul.
