© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Must just be the picture, the face of the insert is marred up from the wheel coming off the car in motion but no cracks in the wheel insert......
Sorry for the wait, busy week!! Here is the picture of the internor of the rim....no conclusions yet, but I plan to spend some time tomorrow on...
Lots of stuff to try.... Let me try to answer some questions: How long did you drive with the slight shudder? *< 1 mile , it got worse...
I am going to give that a try, I am ordering new bolts from Daniel tomorrow along with two new #34 screws. Might not be able to test this...
I really did not think it was a bolt quality problem.... I just do not understand how they can all break in the SAME spot.... No record of...
Wow, lots of good ideas.... My spare bolt in the picture that has rounded heads is a Hills Engineering bolt which is different in this way....
Rotors!! Sorry for ALL the pictures....but wanted to make sure to cover all the bases!! [ATTACH] [ATTACH] [ATTACH] [ATTACH]
More pictures of the wheel hub bolt holes: [ATTACH] [ATTACH] [ATTACH]
Here you go.....pictures and more pictures!! This is the drivers side rear... [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I will definaly make it out to the garage to pull the rotor. I am pretty good about taking off the hand brake since my driveway is an incline...
1994 348 Spider - 34,000 miles Sun Prairie (Madison), Wisconsin Tubi/HyperFlow Momo Stearing Wheel [ATTACH]
I will get pictures of the rotor and brake as requested. The rotor is not blued, and the hand brake was working properly to my knowledge....
The axel is not locked up, I was able to refit the tire using only three bolts and pull it into the garage. The car was towed into my driveway...
The orginal pictures I posted are of the tops of the snapped side of the bolt ends I have to remove from the wheel hub, of course the remaining...
Yes, exactly...all 5 snapped as shown! Stock wheels, 4 OEM bolts, 1 Hills Engineering Was a slight shudder while driving right before the...
Has anyone ever seen anything like this happen to the rear bolts on their car? Tires torqued to 75lbs. I also had the two screws holding...
Thanks! Do you know off hand what the fitting size is? 5mm 6mm? I see the SyncPRO Carb Tuner is a non-mercury replacement.
What does everyone use as a substitute for the U-tube mercury manometer when attempting to balance the A/F between the two banks? I can not find...
This sounds like fun... I am a newbe on here from Madison, WI (Sun Prairie, Actually). Just purchased a Ferrari 348 Spider and would love...
