© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
look at the little hose that runs between the vacuum pump and the space between the cylinders, just in front of the oil filters. If this hose...
S/N 17291 currently black with tan insides. Items that are new, TOH, all valves, cams, seals, timing chain, rails radiator, headers are jet-black,...
you 400 guys are lucky. when i looked at this issue, I was faced with having to re-design the rims to 16" and make a batch of 250 rims due to my...
if anyone needs to have these re-worked, let me know, and thanks for spreading the word. The mod really does work, my engine has 5K miles so far...
sorry for the delay, been on vacation after concorso. [email protected] concerning this modification. Boyd Bowdish
I have a solution to your rotor problem. I can supply you with 2 piece rotors which are a direct fitment to your car. The rotors are new and in...
I replaced the "prone to a constant nose up" rear suspension with a Koni coil over with ride height adjustment. I am using eibach springs and the...
additional note: I always state fuel consumption at 5.5 gph. MPG is a metric that really does our cars a dis-service. My car burns just about...
my 365 GT/4 has been a daily for over 20K miles. I agree, best idea is to just simply drive them. It's a joy everyday.
it takes just a couple of hours to pull the engine. The engine has been designed to worked on out of the car. remove the engine before starting...
contact me if you need replacement tensioners. I developed re[lacement materials and process when I rebuilt my 365 GT/4. I will never re[;ace...
it is a known fact that with the introduction of Viton into the automotive industry, synthetic oils are no longer an issue. ANY old seal will be...
got a solution to this problem. I had to develop a new material system that is permanently bonded to the existing chain tensioner rails. The...
sorry for the delay. I used (2) MSD 6AL part number 6420. We placed them on the front wheel wells which made us have to modify the air intakes....
no real debate, but what I did on my 365 GT/4 was to add (2) MSD units, one for each side and replace the points with the 4 leaf Daytona racing...
http://cgi.ebay.com/ebaymotors/Ferrari-Ferrari-365-gt4-2-2-1974-Ferrari-365-gt4-2-2_W0QQcmdZViewItemQQcategoryZ6212QQihZ007QQitemZ170108463180QQrdZ...
No worries. I agree that Tom will be a good bet. Also do not worry about Mike's work. I live within 20 minutes of his shop and he has worked on...
thank you for your efforts. I will review when it arrives. Dr. Bowditch
if you have yet to start this project, call vintage ferrari parts. Tom will help you out.
Jay, I have #17291 a 365 GT/4 2+2. let us take this off line. Contact me at [email protected]
