© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi, John, Great post! I have the cable free at both ends but do not see / understand how to pull it out. Where does the cable go from...
Has anyone ever seen the bushings spot welded to the rear A-arms? I had to stop and give the arms to a machine shop for removal. This wasn't the...
I understand he bought 0754 in May of 1964 - it's going to be tough to beat this run of continuous ownership, let alone top his participation in...
Hi, Verell, The posts (pins) go in the body to ensure proper alignment. There are three holes in the body for each bezel, one central...
Deves - I can provide detailed info if requested They work great with JE pistons, btw
Yes, Dave has been driving the 1958 250 TR since '64 - the next charity event he will bring it to is Oct 14-15 at Infineon, the Annual CSRG...
David Love and Phil Hill [ATTACH] [ATTACH]
Greg Miller's March GTP
http://www.danville-delegance.org/index.html Nice cars, great cause ~noon to 5
Does anyone have a US-based source for starter solenoids?
A very close match, in terms of metric sizes and woven cloth sheath, can be found from Porsche shops.
A few other items: most groups like to see wheel weights taped; if you choose to tape over the side markers, put a layer of thin cardboard to...
I had an issue once where the self-adhesive weights were put on the inside, which is fine except they were thick enough to hit the calipers. As...
I've tracked my 246 a bit, here is what I've learned: It's possible to overwhelm your oil separator if you use modern tires, I'm running Proxes...
I'm in for a set. I have a set, but the plater ruined them. I am going to see if I can find a trustworthy plater using an old side bezel as a...
Full agreement - I forgot to tell someone not to latch the window and it popped off (again). And with modern adhesives and who knows how many...
I had a Stebro put on my car - it seems you need a lift because the front pipe forces the whole assembly down in the back to slide it in. The shop...
dm_n_stuff is correct - As they are US only UK / Superformance would be a long shot. Sometimes Dennis McCann has a left bezel in stock - Bill Rudd...
There is also a train of thought for SWEPCO gear oil - my memory says it is compatible with the bronze in the synchros, at least compared to other...
If you ever get nervous about the center wire, most bicycle shops sell cable by the foot; you just need to form the ends for the clamp halves with...
