© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Wonder if there is a link to WSM pages to remove the sticky switches mainly from the dashboard , ac control panel, steering and centre console...
Just curious how you broke this? Its usually bullet proof and most cars fail MOT due to torn boot cover on this. Never hear of any one with a...
Top Notch writeup.
Hi Mike, Happy to share the name of the supplier. (Here is the listing https://www.ebay.com/itm/273561039909?ul_noapp=true ) He is listed in...
Wonder if someone has used Aftermarket radiators sold through an Aussie company, but presumably made in China. . Compared to the Original Plastic...
Not entirely correct I think. I am sure i have started my 360 Engine with hood open but can not move gears if its open.
Crank sensor failure will prohibit car from starting. But there are 3 checks you can still do without the OBD for a dead engine . Could be so...
Are you saying the Engine is not revving above a certain RPM even when parked in N ? Or does it lack power when you try to move it. Or not...
Still available?
Nice and informative. I did mine a few months ago but still have not put everything back together. (The speedo pod and the passenger glovebox need...
Intermittent light could be a loose alternator belt, loose cable or an alternator on the last legs. Just stick a multimeter across the batt...
Wanted the Cast Iron Steering rack housing or a fully functional RHD rack. Also looking for one Front CCM brake disc for the 599.
Interested
Ok, tks, Makes sense nowas with the pin in, the pulley carrier was free to move. Will tryvthis method later today and see the results. Tks
Many thanks.
So i' m trying to understand the sequence. The pin is still in the tensioner . The 17mm Bolt is slightly loose,. I tighten the belt by moving...
Installed the cam belt but struggling to understand the Manual in terms of gap setup for the pulley. I have got the pin in the tensioner and the...
Tks guys. Took a few crank hits and eventually came loose. The bad news is that there are no marks for TDC etc and my ESM has the 1 relevant page...
Now you are tempting me to do it. Only concern is that existing belts are 9 years old. Just did not want any unexpected force to snap the belt. :)
Many thanks for the quick reply. Brave move on the ignition tap :) Not sure if I am going to try that. Have a friend helping out so thought I may...
