© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
This primarily occurs a few inches below the crease line. There is a high spot in the middle due to the door reinforcement. Which then trails...
A timely thread as in a couple months I'll be painting my car. It was originally silver boxer and I feel it looses its lines. Also there are so...
I'd appreciate you keep me in the loop on your search as I'm going to be needing same after my restoration and I have no idea of quality and...
There is this hump in the middle of the door right above the door safety reinforcement and drops down to each edge.above crease line its fine...
I see I missed spelled straight in the title,due to smart phone inexperience,give me a key board
I'm working on my gt4 doors trying to get the skins nice and straight. Looks like this is essentially impossible without lots of bondo which I...
You are in luck my interior totally out.there are 12mm Dia holes beneath which the nuts float. The centers of the holes are 32 cm apart from to...
Got out my sunroof to find that the previous owner had previously been in there and had broken off one of the ears on one of the nylon front...
need to remove the sunroof for some work. Is it possible to take out the sunroof without having to remove the headliner ? any suggestions...
forgot to mention mine is a US version with the collision heavy rubber bumpers
I see it is all over the place. Hopefully I'll see a couple cars in person to see the differences.. My rear center panel is fiberglass and I've...
thanks I look forward to it. Mine makes no sense the way it is set up
working on my gt4 I found the access to the tailight is behind a solid Al "plates", one for each side which are riveted to the fiberglass center...
if the serial number is correct 9992, it is for a GT4. Dinos have even serial numbers, GTB/S have odd serial numbers. check it out. What is...
seatlle m5 concerning the single piece water pump seal for rebuild, what is the part number, who for manufacturer (Febi in the photo?) and...
go with a 350, best compromise , a 320 would be significantly harder a low speed. 350 is a nice decrease from original size wheel.
Haven't been on the site in some time but I remember a guy in europe trying to get some carpet made for the gt4. I looked in the search and the...
I realized this is against the creed of originality but I can't stand the safety bumpers vs the euro on the car. Got myself from performance the...
I want to pull the engine to do head work...get rid of the sodium valves. And what I thought would be relatively easy appears otherwise. I...
This is the real thing, acquired from team at 2006 Monaco GP. Manufactured by Fila. Not made available to public. Furth[ATTACH] [ATTACH]...
