Search Results | FerrariChat
Buy

Search Results

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Search Again
Page 9 of 9
  1. jon s
    Post

    1980 GTBi Interior Project

    i have pulled my wheel hub with a universal puller (2 hole) at least 4 times without any problem. you do not need a special ring tool for the hub...
    Post by: jon s, Dec 31, 2013 in forum: 308/328
  2. jon s
    Post

    Another oil related thread.........

    picture needs to go on the permanent save list - never delete. jon s
    Post by: jon s, Dec 31, 2013 in forum: 308/328
  3. jon s
    Post

    Coolant Tank - overflow soldered up...

    soldered mine with acid core solder 5 years ago and it still works fine. you've got nothing to loose and it's an easy job. good luck, jon s
    Post by: jon s, Dec 31, 2013 in forum: 308/328
  4. jon s
    Post

    Steering play in top splines

    i tightened both spline clamp nuts on mine and solved the problem if the nuts are pretty tight and you have lots of miles on the car (mine had...
    Post by: jon s, Dec 27, 2013 in forum: 308/328
  5. jon s
    Post

    speedo disassembly

    talked to north hollywood speedo today. they have replacement odo wheel sets and will replace the odo wheel set, reset to specified mileage and...
    Post by: jon s, Dec 26, 2013 in forum: 308/328
  6. jon s
    Post

    speedo disassembly

    i could reset the odo to zero and it won't hit 59k again until long after i'm dead but i guess i'll contact one of the speedo shops and send it...
    Post by: jon s, Dec 24, 2013 in forum: 308/328
  7. jon s
    Post

    328 Need assistance: louvered GTB fuel lid broke

    fyi: i love zap a gap (cyanoacrylic with filler) but in general cyanoacrylic (crazy glue, etc) is not real waterproof so not great for exterior...
    Post by: jon s, Dec 23, 2013 in forum: 308/328
  8. jon s
    Post

    speedo disassembly

    thanks adrian. would the usual speedo shops have repair parts or do i have to swap wheels from the trip odo? jon s
    Post by: jon s, Dec 23, 2013 in forum: 308/328
  9. jon s
    Post

    speedo disassembly

    i can rotate the 1 thousand and 10 thousand wheels back ward one numeral; ie 69,nnn back to 58,nnn which is probably the right mileage. i assume...
    Post by: jon s, Dec 22, 2013 in forum: 308/328
  10. jon s
    Post

    speedo disassembly

    the joy of getting older, sometimes upright seems to be the remaining good part. anyway, even with dim night lighting the increased amount of...
    Post by: jon s, Dec 21, 2013 in forum: 308/328
  11. jon s
    Post

    Opinion sought in salted roads

    in massachusetts after a bad winter the roads look like the bonneville salt flats. i wait for at least 3 heavy rains in april before we hit the...
    Post by: jon s, Dec 21, 2013 in forum: 308/328
  12. jon s
    Post

    speedo disassembly

    crowndog: the unit has clearly been taken apart before. it has worked fine for about 7k miles until it started jumping last fall. jon s
    Post by: jon s, Dec 21, 2013 in forum: 308/328
  13. jon s
    Post

    speedo disassembly

    by the way, i disassembled all the gauge faces (horrible job) so i could repaint the needles . i extended the white with flat paint 1/2 way up...
    Post by: jon s, Dec 21, 2013 in forum: 308/328
  14. jon s
    Post

    speedo disassembly

    thank you very much. i'll do that very thing. if the sprockets/wheels behave normally is there a reason why the hundreds and thousands wheels...
    Post by: jon s, Dec 21, 2013 in forum: 308/328
Find older messages
Showing results 161 to 174 of 174
Search Again
Page 9 of 9