© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
+1 - It is clear as you get it out. One recommendation - remove the cable to the exterior release handle after you have the latch mechanism...
Nice looking car - welcome aboard.
Not sure about why your gaskets dont fit. Ive made many gaskets over the years, and you can use the same technique to enlarge the holes so your...
just move it to another museum...
As many have said - very, very, nice. Thanks for making this and sharing with us. It is a lot of work, and was well worth it for all car lovers...
Also came in black. Mine was delaminating. I think it is was an attempt to keep heat away from what ever is sitting on the bottom of the trunk....
I'd just give them a call to see what your options are. Hartmut Mees is the owner. They do repair to full restorations. He gave me some...
I just pulled all this out to have my Tach repaired. PT328 is right – you’ll need to pull the dash out enough to unplug the speedo...
I think those are Simmons B-45. I have a set on my 308 GTB. 9x16 rear (245/45), and 8.5x16 (225/50) . They don't stick out. When you look from...
It was smooth still, but felt a little "gummy." Most of the parts still had grease on them, but it was clear that it was time to clean this up...
It's part 11 in the figure - 15 is a plastic bushing inside the conical spring- still on my shift lever in the photos. I'm replacing it, but...
Yeah, when I look at Robs photos a little closer looks like he has a polished spot, but nothing like what is on mine. As I think about it more...
Not sure why it is different, but it looks like the part in Robzworkz shifter rebuild thread. Like most things Ferrari they probably changed the...
Cleaning up my shift mechanism on my 79 GTB. The cup that holds the side load spring looks like it has wear, or is it normal to have this...
BTW - probably have done 50 Fiat single and twin cams.... not too different.
I agree with "mwr 4440" - not rocket science, but it has to be right. I've done a couple now. Made my own cam tool. Most helpful tip - use...
Thanks guys - I'll give them a ring and try to find the one with 8 ribs.
I ordered a replacement intake bellows from the dealer (already tried Ricambi America none available) and they sent me this shorter hose. Ive...
I posted this tip some time ago for holding the cable in place when you are putting the motor back in. Check out this thread....
