© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Lots of good discussion here - Ive been traveling a lot so not too much new on this project, but I have one update, and Ill contribute to the...
Hi P400 Im traveling right now, but did happen to have a readable image of the tag in my photos on this computer. Looks like a S159B. This is...
I tried the repair on the drum dimples that Wil suggested, and it came out much better than I would have guessed. I was a little worried about...
Steve It is an ACCEL p/n 120123 Converted by PO. Looks like an adapter is used to mate up a new rotor to the shaft also. I dont have a p/n...
Pete K. Good tip, I'll drop in on Denis Shaw, and give Richard Garre a call. Just need to find someone who knows there way around this...
Wil Thanks for the advice. The bushings on the pins that slide in the forks are smooth and fit w/o slop and measure to a few thousands...
Hey guys, I'd like to set the advance curve on my single dist '79 308 GTB. Do you know anyone with the distributor bench equipment in the...
Thanks Paul -good idea on the 308 section. Maybe I can find someone closer and see a dist machine in action. As you can see I've already...
Thanks Dave I'll give him a call. For kicks here is what I found after I developed a miss fire and pulled the dist cap to check things out ....
Hey guys, Can you recommend a Marelli distributor expert to set the advance springs? I want to send it out to get them set correctly by someone...
Nice job Chris. You'll wonder how you lived with out it!
I chose the Bend-Pak for quality build and longtime parts availability. They are a established US company that I expect will support their...
The DC clear is sold with the other wheel paints - any bling-equiped parts store. You can test the compatibility of the poly on a painted test...
Hey - just found this when I was looking to see what colors they have... it is a video instructions for their products and they show painting a...
It should not be too hard of a job to get good results spray painting center covers. You can find many variations of light silver metallic paint,...
HI Kendrck - Welcome to the site... Carb tuning is a common area of discussion. You will find enough info that already exists to keep you busy...
Here is a drawing for a my '79 (not sure if it changes by '82). The green wedge tool on the drawing refers to a paice of wood I used to hold the...
check out this thread: http://ferrarichat.com/forum/showthread.php?t=26205 It has a tip on a tool I made to hold the windings in place while...
I had the ball bearing rattle too. I thought it was my compressor going to hell - I mean it was loud and very ugly metallic expensive mechanical...
Rick, If the system will allow refrigerant to go out, in general, moisture can go in. That is one main reason for the evacuation. You probably...
