© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I live in California where temps in the Summer are over 100 degrees F. for 3 or 4 months in some areas. I have spoken with independent Ferrari...
Very nice Jimmy. Just curious why you feel you need to put the stock heat shields back on? Fab Speed opted to leave them off and offer ceramic...
This what your Oem manifolds will look like. This is what mine looked like at 30k miles. [ATTACH]
I have owned my 355 for 5 1/2 years and have driven it 36,000 miles. I speak from experience, that the stock manifold is junk and should be...
+355
I went on the Quicksilver website, all they offer for 355 owners is a rebuild of your existing manifolds. So you have to take yours off and send...
Are these for a 348 or 355. All years? Any pictures or information on these? I never knew they made manifolds?
That is what I did, but perhaps I did something wrong.
Thank you Gerry. I double nutted the stud as you instructed and ended up stripping the end of the stud. It didn't move at all. Not sure I want to...
Hi Gerry, Do the 3 studs unscrew counter-clockwise from the block? Thanks.
I couldn't imagine not having a Challenge grill on my car. When I stand behind my car after a 100 mile drive, it feels like a heater. Keeping all...
360=Boring. That would be a step down from your 355 in my opinion...
Hi Gerry, My car had its 30k service back in 2007 right before I purchased it at 10,200 miles. It had a previous engine out service at 5,000...
I don't think you will notice an increase in power much, but the aural excitement alone is worth it. Your engine bay will also thank you for all...
Yes, thank you very much Henry. I really appreciate your assistance, you are a good man. We will fix and document this for others who find...
Thanks Gerry, your help is greatly appreciated. Question, so if I double nut the 3 studs they will unscrew from the pulley?
I purchased the ebay straight pipes that look like cats for my 1995 355 Spider. I have had them for about 3 years now and I have been very happy....
So after loosening the tensioner bolt and removing the nut in front of the bearing. I am stuck. The bearing casing is stuck on the shaft of the...
Thanks Bruce, can you give me some detailed instructions to remove the belt? Or direct me to a post detailing this? Thank you.
Hi Gerry, I am looking for help so I don't have to pay someone $150/hr to do this if I can do it. I have tools, jacks, stands, and the desire...
