© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
It's the yellow/black (5-8 bank) or the green (1-4 bank) wire connected to the coil for the corresponding bank. Again, you need a scope to test...
These are for a 308 QV but I would expect your car to be similar. Basic wiring of the digi. [ATTACH] If you have a diagnostic plug, check the...
Your comments regarding the throttle response and idle suggest it may be related to the MAF or connection to it. But with all the changes, who can...
Could you please post the part number?
Another shot of what appears to be an OEM finished cam cover from a car now on BAT. [ATTACH]
Just for fun I sprayed out some VHT red and then sprayed 1/2 with Rust-olum Colonial red. I'd to Dupli-color Bright red as well but I'm too...
Probably wasn't "perfectly good" when the guy got it. ;)
Seems to be working for me. [ATTACH]
Check out the Rust-olum Colonial Red. It's very close to original and is flat rather than gloss. VHT wrinkle base coat, then Rust-olum. $6 at Home...
Taped it. Watched the start. Fast forwarded to the finish. Didn't miss a thing.
That is basically what I did. If you look at the lower cam cover picture in my previous post you can see under the spark plug cover where the...
There are stops in the actuator that limits rotation to 180 degrees but the potentiometer could be installed in either position with the...
It's possible that te potentiometer is 180 degrees out of phase with the "mark". I don't know if that would make a difference.
[ATTACH] Best match I could find was Rust-Oleum Colonial Red. [ATTACH] Rosso Barchetta [ATTACH] Whatever you call it, it's not Rocco corsa.
I have no interest in this thread but every time I look at a picture of an F355 with 20" wheels I think of this. No offense intended. They just...
For a DIYer, marking the pulleys and old belts, then transferring the marks to the new belts assures that when the new belts are installed a tooth...
We Well, I have to admit. I've been following this thread and ever time I open it to read the new posts I just smile. It's been entertaining. :)
Saw that years ago. If I wanted a coupe I would have bought a coupe. A spider is a rare breed on these pages. :)
I didn't think you would find one 17 cm long threaded full length. Good find.
You can get a threaded rod and have a nut welded to one end....
