© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Will do. Thanks.
lol. Sorry BJ. Just a simple tightening of the hinge bolt. I just did not realize I could peel the rubber boot back and expose the hinge. I’m...
Mirrors all fixed.
Well, took the 400 for its test drive after a little sorting out.. Short 30 min around town. It’s warm here, but car did great. Idle was steady,...
Blow by canister revisit. Ready to reassemble blow by system. Hose from sump pipe to canister cracked when removed. It’s just old. I want to...
[ATTACH] My car is an 84. Automatic. How do I know if there are transmission cooling lines inside the radiator? I have two external coolers
I am looking to find out about the 400i radiator. Is it just a radiator to cool the engine or does it have automatic transmission cooling lines...
Sounds like a plan. Thanks again.
Hi Raemin. I was holding out to see if I could find the stock part instead of building it. Although of course much less expensive. It’s been hard...
Jim, thanks for all of the info. Pictures speak a thousand words. Looks like you did a great job. Can looks new! Did you remove an oil filter,...
Thanks. And yes I think so too as there are a few rust particles in the screen. What do you think about disturbing the seal on the oil filter plate?
I want to clean out the blow by system on my 400i. I’ve been reading some threads here, but wanted to verify removal. The 2 nuts that hold the...
Thanks for all the replies. And confidence I’d make a good student. Not sure if my past teachers would agree. lol Yes I am thinking I might have...
I have no idea on the stock charcoal canister. I can post pictures of the current set up. Might be easiest to leave for now, till I can get it up...
If I wanted to remove all the lines from the charcoal canisters to the intake, but leave the fuel tanks connected to the charcoal cans could I do...
After my last thread, I am looking to add the crossover between theWUR’s. Wondering if anyone can confirm the parts needed? After looking at...
ok. I guess I will continue to look at the PCV spaghetti. One question though if indeed there is a PCV valve could not be causing idle issues? Or...
2. I believe carbon canister. No not in photos. Hoses running from the crossover of condensation canister and the upper radiator hose goes done...
1. What do you all think of adding the cross over? I have read here some prefer without? 2. Yes lots of spaghetti I would love to get rid off....
Some other angles and shots of things I don’t know what they are in the valley and by distributor. Which cap and rotor are new with in the last...
