© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Well, during my troubleshooting of the slow down light issue I am having with the new exhaust, I discovered my drivers side fan is acting wierd...
OK, I wasted another night of my life on this car :) I made the spacers and put them on. I did not clear any codes because the CEL was not lit....
Seems the majority of the votes are right with me.....are we thinking the majority of people have a problem with their cars? I have another...
Great Success! Just picked up a 10mm X 1mm pitch tap on my lunch break for $5.83 :) I have everything to make up to a 3.5" spacer now and see what...
I have the downloaded version as well, not the real hardcopies. I do not see the bypass one and the modules are not shown in the same place as the...
That is actually a better diagram than what I found in the Service Manual. I believe I have the owners manual downloaded at home, but only have...
Mine is right and left according to the codes pulled. One was just pending still. I can whip the spacers up pretty quick. I am just not sure...
Your confirmation says I am getting bank 1 and bank 2 codes and no bypass code. Highly unlikely that both thermocouples or both ECU's went bad...
Bank 1 and Bank 2 are throwing the code I believe (1 was just still pending)?? Am I wrong in thinking that P1445 is bank 1? No codes in my list...
That will not work unless I inject a fake voltage. This is a 5.2 car.
Mine was sitting just above 7 last night and would get no higher than 190 being agressive. So, I voted 7 since it was closer to that than 8.
I want to keep all systems in place if possible in case a future owner wants to do something different. I also had no codes or reason to think I...
OK, here are the codes. P1445 P1449 According to the literature I have it appears these are: P1445 Catalyst Temperature (Vescovini)...
I think one of these:...
Your post definately sparked me to look into thermocouples more, so it was good. I did some reading on them and have a much better idea how to...
My cooling fan on the drivers side had a blown fuse. It was noticed after the major service during final checkout that it was not working. So, I...
I got a little more info on this problem this morning (still no time for hands on). I did find out from Daniel at Ricambi that all 3...
True, resistive readings won't tell the whole story, but it is a first quick step in diagnosing a bad thermocouple. If they are shorted, then you...
I just checked the original thermocouple just by running it under my faucet and it reads about the same as the one I put in (about 1 ohm at room...
I can no longer provide any meaningful comments on a solution to this until I get more time to mess with it. I need to at least pull the codes. I...
