© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
[ATTACH] Got the metal housing out.
[ATTACH] Before putting this back on the car, I wasn’t happy with the look. It looked crappy so decided to take it apart to clean it up.....
[ATTACH] Test fit the nuts and bolts !
[ATTACH] Nice. Now to drill some holes....
[ATTACH] I bought some metal and a jack saw blade at the hardware store.....
[ATTACH] Nice cut out !
[ATTACH] Next I need some cardboard cut out. I am using the box the energy suspension came in.....
[ATTACH] See !
[ATTACH] The two halves are held together with these little clips. A small screwdriver will ping them off.
Here is the link. https://www.ferrarichat.com/forum/threads/308-gts-b-heater-blower-mounts-are-junk.267911/ rob (black horse) posted it....
[ATTACH] As I have some time this week, I thought I would look at this. I mentioned earlier in the thread that the stupid plastic ears were...
[ATTACH] Installed !!
[ATTACH] Installing the brake disc. I used the lug nuts to line everything up.
[ATTACH] Finally added the new grease cap...
[ATTACH] I also read you should put more grease over the nut and washer. Not sure why you would do this, but I did.
[ATTACH] Here it is with the nut and washer. I read it should be tightened to 15ft lb and then backed off to 11 ft lbs. Hope this is...
[ATTACH] Picture when reinstalling hub.
Thorn. You are correct. The vice idea was a bit crap. In my defense I did have a piece of solid metal between the seal and the vice so that...
[ATTACH] Put it in the vice to push the seal in.
