© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
That gets us up to yesterday. I put the wheels on again and did some testing. The brake failure light is gone. However the brakes do not...
[ATTACH] The new belts arrived and I installed them. So far so good, but I will keep my eye on it. Here are the old belts, and you can see...
[ATTACH] I then reinstalled the carpet. I also have a new zipper cover which at some point I need to install.....
[ATTACH] I then mounted this next to the light assembly. Worked nicely !
[ATTACH] I mounted these on this piece of metal I bought at the hardware store.
[ATTACH] The turn signal lights require a resistor to be installed. (Why can’t they make the bulb with this inside ????).
[ATTACH] Installed.
[ATTACH] Side marker.
[ATTACH] Here is the tail light
[ATTACH] While waiting for the belts to arrive, I decided to do my rear LED light upgrade project.
[ATTACH] and then you hook this up to the caliper and an air compressor, and it just sucks the fluid out. Dry cool. Was done in 10 mins !
[ATTACH] I like this bleeding kit ! the filler bottle attaches like this, and ensures you never run dry.
[ATTACH] Breaks and belts seemed like the priority. The only cause that I could see for the alternator belt was that it seems to be...
At this point I drove very carefully around the neighborhood to see what was working and what wasn’t. Here is what I found..... the breaks...
[ATTACH] And nice clean engine !!
[ATTACH] And that got us to this point. Wheels on !!!
At this point everything was pretty much done so i decided to put that wheels back on. Just before this I decided to let the engine warm up...
[ATTACH] I ended up talking to Larry. His advice was to seal it with an anaerobic sealant. The one he recommended (Wurts) is unavailable...
Hi. Some updates for you guys. firstly saabguy. I didn’t stick the stencil down. Clearly that was the problem, although didn’t consider...
I had a three second video of it leaking, but I can not seem to upload the video. basically within 5 seconds of the engine starting you can...
