© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Couple more things. Valve covers back on, alternator rebuilt with new slip ring, capacitor, regulator, bearings, cleaned up and painted the center...
Its been done brother. For a month or two now. Everything is within spec now.
Correct. But you have to trim the lip on the boot. There is a bead on the inside "Big" End that needs to be cut off. Easy to do with a brand new...
Both outer cv joints were pitted. Both were replaced. Used a baby syringe to extract and inject the grease into the joints. Worked great. Fuel...
Rebuilding the fuel distributor. Last piece of the fuel system! (Also the WUR) dug into the CV joints and that is going well also. One side had...
Changed out both check valves for the air injection. New cut off valve on the way, all new hoses etc. The previous owner had no cut off valve and...
Little before and after of the left tank. Filled with acetone and boiling water, twice. Agitated the mixture with compressed air through a vacuum...
Some more cleaning and digging into. Valve covers being stripped of the old wrinkle finish, fuel sender installed, valve clearances checked....
I just keep getting deeper and deeper here. Got some much needed cleaning done, rear valve cover removed for valve clearance check. All new hoses...
Thank You!
Thank You both!
What is the thread size of the analyzer ports on the 328 gts into the manifolds? Mine are far gone and need to be drilled and tapped
Mine has been sitting for 20 years. From what i see so far, Every o-ring and hose on this car has been dry rotted, broken, deteriorated etc. Fuel...
How much to calibrate one? I am in Dallas Texas. Was planning on rebuilding it but had no idea they had to be calibrated. Or do they? Thanks!...
Any issue with this BOSCH kit? Seems like a lot of stuff is generic for the 308 / 328 but not necessarily for the 87 328 GTS. (Found this out the...
This was literally my next question. Thank You!!! I saw that fitting w/ no Hex on it, Corroded to almost nothing and having signs of seepage, and...
Ordered a pack of 50 McMaster for $9. I only need 8, so if anyone needs some, let me know! Send address and cover shipping.
Im just looking for the o rings. I imagine a local auto parts store will have them in their selection of fuel injection o rings but figured Ide...
Ok. Moving on down the line, injector cleaning and fuel distribution clean and flush ? How? looking for all the gaskets for these hard coolant...
On the list! Thanks.
