© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
If you are using the specified plgs and tightened them to spec, eg. finger tight plus 3/4 turn, they will never "pop" off... If you had 6 of 8...
Fill the plug boots up with silicone sealant. That way you're guaranteed that no moisture or oil get into the back of the connectors... 2...
Philip, look up my post on the subject http://www.ferrarichat.com/forum/showthread.php?t=236698
Why don't you do what I did and save USD 1000 on the hyperflow costs? http://www.ferrarichat.com/forum/showthread.php?t=212160 Marco
Look up my post on the replacement of the Bosch units... Will run you £80 for both (and do both now that you are there). If you need help, I...
What is visible is the parts for a power supply and a character controller (the NEC Chip) to drive the keys and displays. The board that is...
Knowing what I know about the OEM system, I can replace the wires over 15 times for the cost of COP and keep to the stock look. I can't justify...
It must be referring to the later M5.7 based 355's. I have to say that in aspirated motors, I am struggling to see what the fuss is all about...
FBB, I welded mine like that a few weeks back. Though I welded the gear to the shaft. My rationale was that the ringnut takes an axial load,...
Good news is that the 348 generation is 75% Electrics and 25% Elecronics. Take the ECU out and you only have a tiny bit of Electronics in the...
So how about this: A spark plug wire for the 348 (and I suspect for all other Fcars) is made up by 5 parts, of which only 1 is from Ferrari. So...
No biggie (I have had mine leaking for 2 years) unless the plug drowns in the stuff... Every two weeks I do a "mini service" to theoverall...
You can buy all the plugs you need at www.autoelectricsupplies.co.uk. I looked into that and felt the additional work etc. wasn't worth it, so I...
I think you'll find the RPM gauge coil over reads. When you break break free a surge is sent to the RPM gauge which takes a few seconds to...
You need to match cables and plugs. The NGK plugs which have an "R" in their name, eg. DR8EIX (Iridiums) have a 5Kohm resistor built in. The...
Looking at the collapsing faces, as they progress, it gets worse faster... I'd suspect you'll be changing the shaft and gear far sooner than that...
It comes with a spare Gearbox, all in perfect working order (all the work done is cataloged here on F-Chat), meticulously maintained and done over...
Guys, you're all warping the time-space continuum when you hit the gas pedal. If you accelerate harder you'll gain time, when you brake harder...
DO solder the crimps - it prevents oxidation from the inside out. DO use dielectric grease at all junctions to keep moisture out. DO cover the...
This is not hard. Our cars have a switching transistor which powers the two coils. The transistor is bolted to the same frame as the coils. The...
