© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Still have a few sets ready to ship out and once they’re gone I’m done making these! Great upgrade and very easy DIY install. $225 usd [ATTACH]
Thanks EDoug, I too had read about using the Mondial rear struts in place of the Testarossa front trunk struts and believe it was Brian’s...
Any chance you have the part number for the front struts you ordered from rockauto? Thanks
Dennis have you tried calling Jeff Leblond at FJB Shocks in Phoenix?
I will be in my shop tomorrow and have a spare seat arm. If you send me a private message with your contact info I can FaceTime you tomorrow and...
Did my 1977 308 this summer! Perfect fit...
Send me a private message and I will share the correct paint code with you.
Good that you took note of that but my point was you will have no way to determine if the shock is operating at the proper compression or rebound...
Put the shock in a vice, put a piece of old timing belt around the foot valve and grab some vice grips to rotate it. I spent a week with Jeff...
Put the shock in a vice, put a piece of old timing belt around the foot valve and grab some vice grips to rotate it. No special jig needed, just...
Dennis this was for sale here a few months ago. https://www.ferrarichat.com/forum/threads/308-euro-valance-rennspeed.691806/ Jeff
Doubt you will find an OEM ring, but this is what it looks like. [ATTACH]
5 sets left! After that I am done making these :) [ATTACH]
PM = Punto Morto Punto = Point Morto = Dead PM = dead point (PM 1-4 =TDC Cylinder 1 Bank 1-4) AF = Anticipo Fillo (Fixed Advance, AF6=6 degrees BTDC)
Thank you! My thread got derailed and this was the answer I was hoping for! I will remove everything and try to restore the factory set up which...
Upgraded to “turtle farmer” (Jason), member here on Fchat. The board is unbelievable and plug and play once you sort out all the hacks from...
At some point someone converted the passenger door window switch on the drivers door and installed power locks. I’m assuming this rats nest is...
In the process of upgrading the fuseboard and looking for any and all input. I’m 90% there but a few interesting wires I cannot figure out. The...
As good fortune would have it I was able to find a a set of factory seats at GT car parts that needed new skins. My good buddy Lee at Precision...
The door cards are marked 245 so I know they are correct for the car, looks like they sprayed the leather black but the factory colour should be...
