© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
As an afterthought I wonder why we don't have to bleed a normal car master cylinder but should do on the Dino ... Or maybe we should ???
Thanks , I will do that....Couple more things in the back of my head....It was very hard to get any fluid out of the rear bleed nipples ...opening...
Im having a lot of trouble bleeding my brakes...(even replaced the Servo) ..whatever I do I seem to have a lot of brake travel (Albeit quite hard)...
It seems to depend on the type of duct ... Mine came from the uk and the only way I could fit it was to just keep massaging it to fit until it did...
I just gently worked it back on until it clicked into place ...I had it off a few times and back on without a problem....well almost....I have the...
I did strip that one carb and clean everything and found a small amount of crud in the bowl....I also found the float level to be only 45mm so I...
Jets all new and can see through. All I have to do is turn it s quarter turn and it comes alive ... Maybe I should pull that carb and just...
How can I check if it's a leaky inlet valve If I do a compression check and its above 120 ( which it is ). Will that prove the valve is ok ?
Im really struggling to get the carbs set up having read all the articles I can find....I still get popping and rough running until I do something...
Studying the thing more it seems there should be some sort of valve in the spaghetti junction thingy....which is missing I think...maybe I will...
Thanks and yes its the crankcase venting I dont understand...there is a tube from the CC going to a grey cannister and then into two of the three...
As we all know its not good to have air /leaks into the inlet (carb) system....or anywhere come to that....so can somebody please explain how the...
Has anybody either rebuilt one ( and if so how difficult is it) or know anybody in EU who can....preferable UK....any info on this issue ..
They have them on Eurospares .co.uk for £28 Not sure if they are what you are looking for
I think I can answer my own question....had I posted a picture it would have been obvious. Looking back at restoration pics it seems the two anti...
Had my Dino repainted and recently fitted the engine....The painters replaced the shockers at the same time.... Im not sure what is wrong but...
Thanks everybody....been interesting..
I did try the half wave battery charger method but it didnt work....and as Fred says maybe the half wave isnt big enough...finally ADRIAN said...
Dear Adrian... Thank you for your kind offer....by luck I think I have solved the problem with mine and its working again....so I wont bother...
I have been searching around the world for a new pcb for mine .... I did find the dynoplex circuit but it states that one has to make your own pcb...
