© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have a 1995 355 GTS. I have stock exhaust headers and catalytic converters. I think Level 3 would be way too loud for me. Would level 1 be too...
In the owners manual it says to "stop the engine and check the oil level immediately". Is 10 minutes immediately enough? I checked the oil for the...
I am considering getting an aftermarket exhaust/muffler for my 1995 355 GTS. Tubi seems to be the most popular but I read in www.the355.com that...
I am looking for a 355. How can you tell if new Valve Guides are needed? Low compression? Leak down failure? High Oil consumption? Smoke...
Do you first negotiate the price and the get the PPI done or the other way around?
Thanks for the mostly encouraging responses. I just sold a 330 GTC. I spent a lot of money on it, but fortunately the increase in value made me...
I drove the car in question. It seemed to be down on power and idled rough. On the way back the "Check Engine 1-4" light come on. The body is in...
When I click on FerrariAds.com it comes up with "The Webpage cannot be found" Great Forums Thanks, Enzo
I am considering buying a 355 GTS. I know about the valve guide and exhaust manifold problems. I can see these should be one time occurrences. But...
I am having problems with my oil pressure and have eliminated many items. The oil pump is the next thing to check. I was told I could remove the...
I am having problems with the oil pressure on my 330 GTC. After the engine is at normal operating temperatures, if I am running the engine at a...
Actually, on my 67 GTC, there was 6 studs, 3 around the top input water inlet and 3 around the impleller. I had a hard time fixing mine. There is...
I had a problem with my brakes. I went to put on the brakes and the pedal almost went to the floor. I released the brake and pushed again and then...
At idle, when fully warmed up, it has about 1-2 bars. At about 4000 rpm it is 6-7 bars. Yes, the problem is still happening with the Baldwin...
Rifledriver: Are you talking about the adjustment for oil pressure, in front of the right side oil filter? It has a domed nut and then 2 more lock...
Rifledriver: Where is the pressure relief valve? Can I look at that when the pan is off? The oil pressure is good a normal operating temperatures...
Can the oil screen be checked by removing the lower oil pan plate? Thanks
This has a mechanical oil pressure guage. I disconnected the oil pressure gauge and let the line run into a container. When cold, nothing comes...
I have a 330 GTC that has an oil cooler built into the radiator. I have tried both the Fram 28041 and Baldwin B253 oil filters. When I first start...
