Search Results | FerrariChat
Buy

Search Results

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Search Again
Page 6 of 10
  1. LarryS
    Post

    Is this Liquidvac any good?

    I drive the rear wheels on to a 2x4, followed by a 4x4, throw down a piece a old carpet, and reach to the "front" drain bolt. It's pretty easy.
    Post by: LarryS, Apr 26, 2007 in forum: 308/328
  2. LarryS
    Post

    Mondial Qv 308Qv Cam seal replacement

    With the roll pin out, I grabbed mine with smooth face vice grips and tapped it out with a small hammer. I think you'll have to machine some...
    Post by: LarryS, Apr 21, 2007 in forum: Mondial
  3. LarryS
    Post

    308 qv CV Boots

    This is what I used: part number CVK4 CV JOINT BOOT KIT 4 BOOTS 8 CLAMPS AND GREASE, DINO THRU TESTAROSSA $52.00 (although I...
    Post by: LarryS, Apr 21, 2007 in forum: 308/328
  4. LarryS
    Post

    Car pulling under braking?

    Did you remove the calipers? Any chance the caliper shims got overlooked? My car had the shims missing on one bolt, when I correctly shimmed...
    Post by: LarryS, Apr 14, 2007 in forum: 308/328
  5. LarryS
    Post

    84 308 QV Problem starting

    try: http://ferrarichat.com/forum/showthr...ight=frequency or copy & paste:...
    Post by: LarryS, Apr 12, 2007 in forum: 308/328
  6. LarryS
    Post

    GT4 A/C compressor - shaft seal

    I think the problem is the poor quality Aspera compressor. Replacing the Aspera seal seems to rarely work, while I have replaced york seals...
    Post by: LarryS, Apr 11, 2007 in forum: Technical Q&A
  7. LarryS
    Post

    308 qv CV Boots

    I received the boots from Dennis McCann, they were flat and fit properly. The clamps were the same design as the ones shown in the first three...
    Post by: LarryS, Mar 20, 2007 in forum: 308/328
  8. LarryS
    Post

    308 qv CV Boots

    thanks guys. when I get the boot kits (and mess something up) I'll be back with more questions. (I removed the original clamps very carefully...
    Post by: LarryS, Mar 9, 2007 in forum: 308/328
  9. LarryS
    Post

    308 qv CV Boots

    Thanks Chris, I ordered a kit from McCann. Others have used them and the picture on his website looks correct.... Larry
    Post by: LarryS, Mar 9, 2007 in forum: 308/328
  10. LarryS
    Post

    308 qv CV Boots

    That's the exact part number I have, but the boots have the lip made into them (maybe WorldPak has them mis-labeled?) ....Larry [ATTACH]
    Post by: LarryS, Mar 8, 2007 in forum: 308/328
  11. LarryS
    Post

    308 qv CV Boots

    Yes, that is where the pictures I used came from. My pieces look identical to what Dave had, but it don't look right to me......
    Post by: LarryS, Mar 7, 2007 in forum: 308/328
  12. LarryS
    Thread

    308 qv CV Boots

    I am in the process of changing my CV joint boots (84 gts qv). I have boot kits 92833292402 (just like the first picture from member Dave) But...
    Thread by: LarryS, Mar 7, 2007, 15 replies, in forum: 308/328
  13. LarryS
    Post

    Frozen gearbox fill bolt

    Please report back.
    Post by: LarryS, Feb 13, 2007 in forum: Technical Q&A
  14. LarryS
    Post

    My Bendpak MD-6XP installation with pictures!

    Rubber drain hose for a/c ?
    Post by: LarryS, Feb 5, 2007 in forum: Technical Q&A
  15. LarryS
    Post

    My Bendpak MD-6XP installation with pictures!

    Chris, do you think 1 2x12 height would work if you slid on the "feet" after driving the car into place? (leaving the allen screws out) I...
    Post by: LarryS, Jan 31, 2007 in forum: Technical Q&A
  16. LarryS
    Post

    relay oxygen sensor

    try: http://ferrarichat.com/forum/showthread.php?t=110147&highlight=frequency or copy & paste:...
    Post by: LarryS, Dec 27, 2006 in forum: 308/328
  17. LarryS
    Post

    relay oxygen sensor

    they are sometimes very easy to repair. see this link. http://ferrarichat.com/forum/showthr...otection+relay
    Post by: LarryS, Dec 20, 2006 in forum: 308/328
  18. LarryS
    Post

    QV, exhaust sample tube leaking

    Well, as I started the repair I found that the leak was not from the connection at the manifold as I suspected, the sniffer tube was snapped about...
    Post by: LarryS, Dec 11, 2006 in forum: 308/328
  19. LarryS
    Post

    QV, exhaust sample tube leaking

    Thanks for your help Steve....
    Post by: LarryS, Dec 5, 2006 in forum: 308/328
  20. LarryS
    Thread

    QV, exhaust sample tube leaking

    I have an exhaust leak on the L/Rr (#4?) mixture sampling tube. Any advice on removing the 4 tubes and repairing the leak? I would rather not...
    Thread by: LarryS, Dec 4, 2006, 4 replies, in forum: 308/328
Showing results 101 to 120 of 191 Next >
Search Again
Page 6 of 10